34689
13
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
mod.AD10EU page 13
0106517: NEW COUNTERWEIGHTS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Beginning with serial no. 70730.0001, the front counterweight with part no. 034635 (ESI with part nos. 052574 and 036952) and
the top counter- weight with part no. 046542 will be used on all the Dialogic washing machines.
0106537: INITIALIZATION OF CONTROL CARD
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
An examination of the data collected from the Dialogic washing machines in which the control card had been replaced shows that
the permanent memory has not been initialised.
In fact, since the replacement cards are normal production cards, the permanent memory is not initialised when supplied; this
operation is carried out automatically during the line test.
The initialisation process is mainly concerned with the ability of the program to determine the water hardness automatically at the
first wash. If this initialisation is not carried out, a default average water hardness is assumed. If the value of the water hardness is
in fact average, then pre-washes and rinses will not be affected by malfunctions. However, problems may arise if the water is soft
or very hard.
To avoid any malfunction of the conductivity sensor, which may result in excessive rinses or the incorrect execution of
prewashes, the control card must be initialised every time it is replaced. To do this, use one of the following procedures:
---The quick procedure, using the washing machine control panel.
This procedure is simple, and therefore recommended. For a detailed explanation of the procedure, refer to the section "Updating
the water hardness measurement" in the Dialogic washing machine manual.
---The extended procedure, using a PC. This procedure requires further information regarding the date and the country. It is based
on the LBSAT.EXE program used by the Technical Service personnel, and is carried out as follows:
- connect the PC to the washing machine
- switch on the washing machine
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Indesit AD10EU wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info