mod.AD10EU page 15
interchangeability, they are handled assembled with rear panel and terminal block.
This modification also applies to cabinets which are no longer produced but still handled as spares. Therefore, in cases where the
cabinet is modified, it is necessary to use rear cover cod. 049515 and terminal block cod. 041163.
n1040015: Top depth reduction
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Top depth was reduced in Super-Margherita and Giugiaro washing machines, with serial number 81012.0001 and 81022.0001,
respectively.
The new tops are interchangeable with the pre-modification ones and the SAT codes 046139 (530 mm depth) for Super-
Margherita and 044821 (530 mm depth) for Giugiaro remain unchanged (Historical consumption requirement).
Due to the presence of large stocks, the pre-modification tops 061931 Super-Margherita (540 mm depth) and 061932 (544 mm
depth) Giugiaro were re-coded.
n1040019: Error signalling from control board
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
From serial number 90101.0001 to 90415.0001, the control boards of Dialogic, AD10IT, AD10EU, AD12EU and AD12BE
washing machines can signal the F03 error code. In standard conditions, the code is associated with a defect of the temperature
probe. In the above-mentioned machined (and only in them) the code is associated with the control board that must be replaced.
n1040032: New Dialogic control board software (2.12)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Beginning from serial number 90531.0001 the new software 2.12. has been introduced in the control board (white sticker) code
057723 used in the Dialogic AD10IT washing machine in replacement of the old software 2.01.
The boards with software 2.12 can be used on the premodification appliances and are handled with the same SAT code. The
boards with software 2.01 can only be used until the arrival of the new boards.
All the control boards used in the Dialogic production will be provided with the new software by June.
Code 057723 - Control board with white sticker;
AD10IT
AD10EU
AD10SKD
Code 057722 - Control board with blue sticker;
AD10UK
Code 057701 - Control board with yellow sticker;
AD12EU
AD12BE
