20
1. The appliance is not working.
•Is there a power failure?
•Is the plug properly inserted in the socket?
•Is the double-pole switch on?
•Has the fuse blown?
•Is the power cord damaged?
•Is the thermostat set to
•
(Stop)?
2. Temperature inside the compartments is
not low enough.
•Is the door shut properly?
•Is food obstructing proper door closure?
•Is the appliance installed near a heat source?
•Is the thermostat setting correct?
•Are the air circulation vents blocked?
3. Temperature inside the refrigerator
compartment is too low.
•Is the thermostat setting correct?
4. The appliance is excessively noisy.
•Has the appliance been installed correctly?
•Are the pipes at the back touching or vibrating?
5. Water collects at the bottom of the
refrigerator compartment.
•Is the defrost water drain blocked?
6. Excessive frost build-up in the low
temperature compartment.
•Is the door shut properly?
•Is food obstructing proper door closure?
Notes:
• Gurgling and hissing noises due to
expansion in the refrigerant circuit are
normal.
TROUBLESHOOTING GUIDE
Before contacting After-Sales Service:
1. See if you can solve the problem yourself with
the help of the “Troubleshooting guide”).
2. Switch the appliance on again to see if the
problem has been solved. If it has not,
disconnect the appliance from the power supply
and wait for about an hour before switching on
again.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
• the nature of the problem
• the model
• the Service number (the number after the word
SERVICE on the rating plate on the inside of the
appliance)
• your full address
• your telephone number and area code.
Note:
The direction of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
AFTER-SALES SERVICE
