22
Door Swing Reversal
Reversing the door swing
The refrigerator has the capability of opening the
door from either the left or the right side.
The unit is delivered to you with the door opening
from the left side.
To change the opening direction, please follow
these instructions.
Note: Before reversing the door swing, unplug the
appliance from the mains or disconnect the
electrical power supply.
1. Remove the two screws (1) holding the top
hinge (2) (right side) to the frame. Remove the
hinge (2).
2. Lift the door off the bottom hinge pin and place
it on a nonscratching surface.
3. Remove the two screws (3) holding the bottom
hinge (4).
Remove the hinge (4).
4. Reverse the direction of the hinge (2).
Reassemble the hinge (2) on the bottom left
hand side using the two screws (1).
5. Lower the door onto the bottom hinge (2) pin.
6. While holding the door in the closed position,
reassemble the top hinge (4) on the left hand
side using the two screws (3). Do not tighten
the screws (1) until the top of the door is level
with the counter top.
