Bedienungsanleitung Inspire CR2.5 (Seite 14 von 28) (Englisch)

738436

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Page | 13

remedy for such a symptom is to isolate the unit from potential disturbances. Additionally, a person’s body chemistry or lack of perspiration

can prevent the chest strap from providing a strong or accurate heart rate signal.

A wireless telemetry heart rate receiving system is one feature found on this unit. For the console to detect and display your heart rate

wirelessly, five (5) conditions must be present:

1. A compatible Bluetooth BLE or ANT+ heart rate transmitter must be functioning and worn. For proper function, please refer to the

manufacturer’s instructions.

2. The unit must be powered on.

3. A workout program must be running.

4. The user is within three (3) feet of the console.

5. The heart rate transmitter must be connected to the console.

For strong transmission of the heart rate signal, lightly wet the chest strap electrodes (the two molded, rectangular surfaces on the backside

of the strap) and secure the strap as high under the chest muscles as possible. The strap should be snug, but comfortable enough to allow

for normal breathing. For detailed and model specific information, read and follow the heart rate manufacturer’s instructions.

The chest strap will deliver an optimum heart rate reading when the electrodes are in direct contact with bare skin or in some cases,

through wet, lightweight clothing. If necessary, moisten the chest strap electrodes by pulling the center of the chest strap away from the

chest to expose the two electrodes.

OPERATIONAL MODES

Ready Mode

The Ready Mode is designed to notify the user that the console is powered on and ready to begin a program. “Inspire Fitness” will scroll

upward in the 13x94 Brickyard Display, while the QR code containing links to the Inspire Fitness Studio applications will post in the 25x25

Brickyard Display. The Ready Mode is ten (10) minutes in length. If no other activity occurs before the Ready Mode period has elapsed, the

console will enter the Sleep Mode.

Sleep Mode

After five (5) minutes of inactivity, the console will enter the power-saving Sleep Mode and display the Inspire logo. All display features will

switch off. Any previously-entered user data will be saved. To launch the Ready Mode, rotate the handlebars or press any button on the

console.

Change Units Mode

During Ready Mode and any Program Run Mode, pressing the CHANGE UNITS key will toggle the displayed values between the Metric-

Meters Unit Setting, Metric-KMs Units Setting and Standard-Miles Units Setting.

Metric-Meters The Metric-Meters Unit Setting will post the distance value in meters and pace value in Mins/KM.

Metric-KMs The Metric-KMS Unit Setting will post the distance value in kilometers and the pace value in Mins/KM.

Standard-Miles The Standard-Miles Unit Setting will post the distance value in miles and the pace value in Mins/Mile.

Sound On/Off Change Mode

The SPEAKER ON Icon or SPEAKER OFF Icon will always be lit depending upon the user’s current selection. To toggle

between the Speaker On setting and the Speaker Off setting, press the SOUND ON/OFF key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inspire CR2.5 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info