799604
11
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
20 | support@instantpot.com | 1-800-828-7280 instantpot.com | 21
Settings
Setting Description
Set a Delay Start timer.
Delay Start can be set from between
10 minutes (00:10) and 24 hours (24:00).
01 Select a Smart Program and tweak it as
needed, then press Delay Start.
Once pressed, there is no way to go back
to the Smart Program settings. You’ll have
to press Cancel and start again.
02 When the hours eld ashes, use the
− / + buttons to adjust the hours.
03 Press Delay Start again to toggle to the
minutes eld and use the − / + buttons
to adjust the minutes.
04 The Delay Start timer starts automatically
after 10 seconds.
When Delay Start ends, the Smart Program
begins and the display shows On.
Delay Start is not available with the Sauté,
Sous Vide or Yogurt Smart Programs.
Reset an individual smart program.
When in standby, press and hold one Smart
Program button until the multicooker returns
to Standby and displays OFF.
The Smart Program’s pressure level, cooking
time and temperature are restored to the
factory default setting.
Reset all smart programs.
When in standby, press and hold Cancel until
the multicooker beeps.
All Smart Program pressure levels, cooking
times and temperatures are restored to the
factory default setting.
Status messages
The Instant Pot is in standby mode, ready for action!
May indicate that the lid is missing or is not properly secured.
The multicooker is pre-heating.
The Rice Smart Program is running.
The Yogurt Smart Program is in the process of pasteurizing milk
(i.e., the Yogurt Smart Program is set to More).
The Sauté or Sous Vide Smart Program has reached the ideal
cooking temperature and food may be added to the inner pot.
Display shows one of the following:
• When Delay Start is running, the timer counts down until the
Smart Program begins;
When a Smart Program is running, the timer counts down
the remaining cooking time;
• When Keep Warm is running, the timer counts the length
of time that food has been warming.
The Smart Program has nished and Keep Warm is off.
The multicooker is overheating due to insufcient liquid.
See Troubleshooting for more information.
Do you see something else? See Troubleshooting for more information.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Instant Pot Duo Viva - 2020 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info