Bedienungsanleitung Inventum VKI 3010 ZWA (Seite 16 von 40) (Deutsch, Englisch, Holländisch, Französisch)

694976

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

before ﬁrst use

Before using the induction cooker for the ﬁrst time, proceed as follows: Unpack the induction cooker and remove all packaging

material. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking the appliance, check it for

external damage that may have occurred during transport. If still present, remove the protective ﬁlm from the glass plate. Clean

the glass ceramic plate with a moist cloth. Check that the voltage stated on the information plate matches the voltage used in your

region.

For the installation of the cooker you must observe the instructions in section 7.

operation of the appliance

Only use pans that are suitable for an induction cooker and have the correct size with a cross-section from 15 to 20 cm.

The induction cooker works by means of electronic sensors that are operated by touching the touch control and/or control key. At

each touch of a touch control or control key, you can hear a sound signal. Make sure the operating section is always clean and dry.

Even a thin layer of water could prevent the keys from being operated.

• Check that the ventilation openings are not blocked and do not place cookware in the direct vicinity of the induction

cooker.

• Place a pan with food or liquid in the centre of a cooking zone.

• Insert the plug in the socket and a beep will sound. The indicator lights of both cooking zones ﬂash on the display. The induction

cooker is now in standby position. As long as the induction cooker is in standby position, the indicator lights continue to ﬂash.

• Press the [ ON/STANDBY ] key to select the required cooking zone.

• Press the [ MENU ] key to activate the required cooking zone. The cooking zone is ready for heating. The indicator light for

power lights up and the power is shown on the display.

• Turn the control key to the left [ - ] or right [ + ] to set the required power.

• Press the [ MENU ] key to change from power display to temperature display and vice versa. The indicator light for temperature

lights up and the temperature is shown on the display.

• If there is no pan on the cooking zone after switching on, the induction cooker will not get hot. The error message [ E0 ] appears

on the display and an alarm signal sounds to indicate that no pan has been placed. One minute later, the induction cooker

switches off automatically.

Cooking zone - Ø 17 cm Cooking zone - Ø 14 cm

Number of positions 10 10

Power range 200 - 1600 watts 200 - 1300 watts

Temperature range 60 - 240°C 60 - 240°C

SETTING THE TIMER

• Press the [ MENU ] key of the required cooking zone twice to set the timer. [ 0:00 ] ﬂashes on the display. The indicator light

of the timer of the required cooking zone lights up. Turn the control key to the right [ + ] or left [ - ] to adjust the time. The timer

can be set from 1 minute to 3 hours.

• Once the time has been set, it will ﬂash a number of times and then start to count down. The display will alternate between the

time and the temperature/power position.

• When the set time has passed, a beep sounds and the cooking zone switches off automatically. On the display you can see a

ﬂashing [ OFF ] and the indicator light of the cooking zone ﬂashes.

• The induction cooker switches off automatically after the maximum cooking time (3 hours) has passed, if you did not

set a time yourself.

SWITCHING OFF THE INDUCTION COOKER

• When the maximum cooking time or set time has passed, the induction cooker switches off automatically.

• Press the [ ON/STANDBY ] key to switch off the induction cooker manually.

Caution: the glass in the cooking zone area will be too hot to touch.

• After switch-off, the internal ventilation continues to run for approximately 1 more minute in order to cool the cooker.

• Remove the plug from the socket if you will not be using the cooker for a longer period of time.

16 • English

VKI3010ZWA-instructions.indd 16 13-9-2018 09:25:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inventum VKI 3010 ZWA Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info