Bedienungsanleitung Inverto IDL7000m SCI (Seite 10 von 87) (Englisch, Schwedisch, Finnisch)

509750

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

LNB Type

Select Universal for most standard LNBs, or Unicable if you have a Unicable LNB.

Motor System

If a motorized dish is connected to the digital receiver, use this option to set the system used for sending commands to the motor.

Motorized dish

If you select one of the options for motorized dish and press the

“Yellow” function key, a new menu bar will be open. Here, you are able

to adjust and set the position of this satellite. The two level bar meters

can be used during adjustment. Use the color buttons on the remote

control, as shown at the bottom of the screen, to move the dish and

set the limits.

The “Yellow” “Recalculate” key is used to recalculate all satellite

positions, if the base position of the dish has been moved. if you

move the dish, simply enter the menu, adjust the position for only

one satellite and press the “Yellow”. The receiver will recalculate all

positions accordingly.

Satellite

Use this option to select the satellite for which you would like to set the position.

Reference transponder

This option allows you to set which transponder is used as the reference.

Move the dish

Use this option to set the dish movement speed to “Fine” or “Coarse.”

Limits

Use this option o turn on or disable the set limits.

Insert or delete a satellite from the list

You can add satellites to the list and set their individual settings and position, if using a motorized dish. Use the color keys on the

remote control, as shown at the bottom of the screen, to delete, insert, or set the motorized position of each satellite.

LOF Low and High Band

The LOF (Local Oscillator Frequency) of the LNB is usually printed on the LNB itself or in its documentation. You can set the High

and Low LOF frequencies to match the LNB here.

Band switching

The receiver uses a 22kHz signal to control the band of the LNB. If you do not know if your LNB supports this feature, set the option

to Auto.

Primary and secondary DiSEqC

You can connect up to two cascadable DiSEqC switches to the receiver. This option allows you to set the type and input port for

each switch.

Channel ID (Unicable only)

This option allows you to select the Unicable channel ID for the receiver. In a typical Unicable LNB installation, you are able to

connect multiple receivers to a single LNB, with each receiver set to connect to a different Unicable channel ID.

LNB Feed (Unicable Monoblock only)

This option allows you to select which feed of a Unicable Monoblock LNB you want to use for this receiver.

CONGRATULATIONS: you have conﬁ gured your product. You may start watching and recording programs.

Note: In order to set the correct video output type of your digital receiver press “Menu“ + “Settings“ + “Audio/Video Settings“ (see the

chapter Audio/Video settings).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inverto IDL7000m SCI Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info