Bedienungsanleitung Inverto IDL7000m SCI (Seite 11 von 87) (Englisch, Schwedisch, Finnisch)

509750

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

Changing the program on your receiver (Programme selection)

You can use the numeric keys (20) on your remote control.•

You can use the directional keys (7) “Up” and “Down” on your remote control or on the front panel of the receiver.•

You can use the Ch+ and Ch- keys (13) on your remote control•

Scroll through the programme list by pressing the “TV” key (3), select with the navigation key “Up” or ”Down” the programme list, •

and conﬁ rm the selection with “OK” key (6).

Changing volume level

Use the Volume +/- keys on the remote control. Optionally, you can also use the directional keys “Left” and “Right” on your remote

control or on the front panel of the receiver, while watching a TV programme.

Recording TV/Radio programmes:

From the Current Programme:

To record a broadcast programme, you can press the red “REC” (28). key. From this instant, the program is recording onto the

built-in hard disk. You can stop the recordings with the “STOP” key (27). A message appears if the recording ends. If more than one

recording is running you can stop one by selecting it using the “Up” or “Down” keys (7) and pressing “OK“ (6) to conﬁ rm it. For this

function, you can use keys on your remote control or on the front panel of the receiver.

From the EPG:

Press the “GUIDE” key (19), the EPG (Electronic Program Guide) appears. Here you can ﬁ nd a list of the actual programmes to be

broadcast, if the channel information is available. The availability of the EPG information also depends on how far into the future the

broadcaster supplies the data.

Select the desired programme with the navigation keys “Right”, “Left”, “Up” and “Down” (7). The selected programme is highlighted.

By pressing the “REC” key (28), you can add the selected programme into your Personal Planner for further processing, such as

scheduling an automatic recording.

Time shift:

If you are interrupted while watching a TV program, just press the “Pause/Play” key (26). From this moment, your programme will

be recorded on the built-in hard disk. On the screen, you will see a frozen picture, like the one you have when you press pause on a

VCR, as well as the time-shift counter. By pressing the “Pause/Play” key (26) again, the programme will start again, continuing from

where you have stopped.

Note:

During recordings, a red dot with the programme name is displayed on the upper part of the TV screen. The maximum number of

simultaneous recordings is two, plus one time shift. This information will disappear automatically within the OSD-timeout, by pressing

the “Blue” function key (24). you can make it visible again for another OSD-timeout period.

Viewing recorded programmes

Press the “Library” key (5), a list of the recorded programmes appears. Select with the directional keys “Up” and “Down” the desired

programme and press “OK” (6) or “Pause/Play” key (26). Use the “Exit” key (22) to exit the library.

2. Basic Operation:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inverto IDL7000m SCI Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info