Bedienungsanleitung Jablocom GDP-04i (Seite 14 von 20) (Englisch)

607095

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

XC_GDP-04i.ENG.MAN.Manual.15.A

- 12 -



   

Warning: Synchronize your GDP-04i’s phonebook data with PC before star ng of ﬁ rmware

update to prevent possible data loss!

UpdateTool will oﬀ er you all ﬁ rmware versions available for your phone. Choose Bootloader, So ware and the Lan-

guages you want to upload into your phone and select

  

. The phone will automa cally switch to standby mode

as soon as the upload is ﬁ nished.

 

You can use the GDP-04i as a PC-fax for sending/receiving your faxes from/to your PC.

To use the GDP-04i as a PC-fax, you have to install fax service (op onal component of Microso Windows installa-

 on). This will add FAX as prin ng device in the list of your printers. Open proper es of FAX and select GDP-04i as a

device for sending/receiving faxes during installa on of a fax feature of your opera ng system.

To ac vate automa c receiving of incoming faxes you have to set-up Fax Console (Start/All Programs/Accessories/

Communica ons/Fax/Fax Console).

Warning: Digital fax func on may not work properly unless it is fully supported by your GSM

service provider.



The GDP-04Ai oﬀ ers you the possibility to connect a standard analog phone.

This feature allows you to operate an analog phone in a similar way as if it is connected to a standard ﬁ xed line net-

work (PSTN), but over a GSM network.

You can dial a number from the GDP-04Ai as well as from the analog phone. They can not be used simultaneously.

The call is executed through your GSM connec on in both cases.

An incoming call rings on the GDP-04Ai as well as on the a ached analog phone. The user can answer the call from

either phone.

To switch an ongoing call from the GDP-04Ai to the a ached analog phone, press the “Space” key (on the character

keyboard). You will hear the ringing signal of three short beeps. You will be disconnected once the analog phone

answers the call. You may hang up now.

To switch an ongoing call from the a ached analog phone to the GDP-04Ai, press the FLASH on the phone, wait for

the call to be answered on GDP-04Ai and then hang up.

Only one phone or master PBX line (home exchange unit) can be a ached.

Warning: Never connect the GDP-04Ai into a wall socket of a ﬁ xed line network (PSTN).



JABLOCOM is improving the GDP-04i phone so ware as well as the JabloTool call management so ware con nu-

ously. If you ﬁ nd an incorrect phone behavior, please check if you use the latest available ﬁ rmware version within the

JabloTool (menu ). Detail update instruc ons as well as the latest JabloTool version you can

ﬁ nd on our website - www.jablocom.com/download.



Solu on



Your SIM card is not placed in the SIM holder correctly or the phone does not support your SIM card type.

Check if the SIM card is placed in the holder correctly or contact your GSM service provider.



The network refused to register your SIM card into the network. Contact your service provider.



The network did not correctly perform the USSD command you sent. Check the command syntax or contact

your service provider.



The network refused the USSD command during USSD dialog. Repeat sending the command or contact your

service provider.



There is a conﬂ ict between your request and the current phone status, for example during phonebook

import from SIM. Repeat your request.



Your text message was not sent to the network correctly. Check the phone number and try again. If the error

repeats, contact your service provider.



Possible problem on the a ached analogue phone. Unplug the GDP-04i power adaptor, check your analog

phone and its cable and reconnect power adaptor to the GDP-04i.



Wrong input or ac on was performed, for example an incorrect service code or an incorrect SIM toolkit

command. Conﬁ rm you are using correct code.



An incorrect PIN was entered. Enter a correct one.



Internal error of the phone. Switch the phone oﬀ , disconnect the internal ba ery for about 10 seconds and

then switch the phone on again. If the error repeats, return the phone for service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablocom GDP-04i Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablocom GDP-04i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info