Bedienungsanleitung Jablocom GDP-04i (Seite 16 von 20) (Englisch)

607095

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

XC_GDP-04i.ENG.MAN.Manual.15.A

- 14 -



   

Choose

                     

       

for recording a new voice message.

Call to the GDP-04i RF from another phone. GDP-04i RF

receives the call automa cally. A er 4 beeps it starts

recording. The voice message could be

up to 15 seconds long. If you want a shorter message

press

  

. The phone than replays the message back.

Press

  

for saving the voice message.

If you like to check the recorded message, go to the

       

and press

  

A er pressing the panic bu on or ac va ng the sensor, the emergency messages are sent ﬁ rst. Then phone

calls to the ﬁ rst phone number. When the call is connected, phone plays the voice message twice and than

connects audio to the hands free. When the call is ﬁ nished, the phone calls to all other numbers in the same

way. The length of the call is limited to 5 minutes.

If you press a panic bu on during a ringing incoming call, the phone receives the call to the hands free mode.

Try the emergency func on a er comple ng se ngs.

Pressing the panic bu on during incoming call accepts the call on the handsfree. Phone can be operated by

one wireless bu on both way (making calls, receiving calls).



A wireless relay can be operated via SMS sent to GDP-04i RF or from the phone’s menu. All se ngs are done in the

                 

menu.

If you enter the

                

menu for the ﬁ rst  me, the phone guides you

thru all necessary se ngs.

To enroll GDP-04i RF into a new wireless relay (for example AC-88) switch the relay into the enrollment mode and

choose

          

on the phone. The phone sends the enrollment signal immediately.

For changing the output name go to the menu

         

                   

Use right arrow or green bu on to

change it.

Use

 

for switching between

    

and

   

. If the output is in the

    

mode, it reacts to the SMS message accordingly. If it is in the

   

mode, it switches on only for 2 seconds.

For opera ng the outputs send an SMS to the GDP-04i RF phone number.

Syntax of the SMS is:

<Ac on> <Output name> where:

<Ac on> is



for switching on the output,



for switching the output oﬀ .

This text cannot be changed and depends on the selected language.

<Output name> is

  

  

as a default. User can modify the output name.

If you like to switch the output on for the limited  me, send an SMS

<Ac on> <Output name> HH:MM:SS

Examples:

ON deviceX Switches on permanently the output PgX of the wireless relay

OFF DEVICEY Switches oﬀ permanently the output PgY of the wireless relay

ON DEVICEX 3:00:00 Switches on for 3 hours the output PgX of the wireless relay

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablocom GDP-04i Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablocom GDP-04i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info