Bedienungsanleitung Jabra GN9330e (Seite 6 von 46) (Deutsch, Englisch, Französisch, Spanisch)

680368

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Power mode Range* DECT Range* US DECT

Normal Up to 120 m Up to 400 ft

Low Up to 60 m Up to 200 ft

Very Low (V. low) Up to 25 m Up to 80 ft

* In typical ofﬁce environment

Note: The Normal power mode is the default setting.

To change the range/power mode:

1. Use

to locate the range/power mode menu on base display.

2. Use

to select one of the 3 modes from the menu.

3. Press OK to conﬁrm the new mode.

2.4.4 Sound mode selection

This menu is split into two sections: “Treble/Normal/Bass” and “Fixed/Switch”. These two

sections are separated by a blank line. It is possible to choose one mode in each of the two

sections.

Your headset offers 3 treble/bass modes (Treble, Normal and Bass). You can change these to

suit your personal preferences or needs, and seperately determine the USB sound quality.

Sound mode Effect Beneﬁts

Treble Accentuates high tones Ideal for users with slight high-

frequency hearing loss

Normal Accentuates all tones evenly Ideal for all users

Bass Accentuates lower tones Ideal for users preferring a bass-

rich sound

Sound mode Effect Beneﬁts

Fixed Speech quality in headset loudspeaker as

known from traditional telephones (nar-

rowband)

Improved talk time in USB mode

Switch Automatically switches between wideband or

narrowband sound quality. In conference call

mode, automatic switching is disabled.

Enhanced USB sound quality

Note: The Normal mode is the default setting.

Important: For USB applications, the volume settings are ﬁxed and need no adjustment.

2.4.2 Hookswitch selection

The GN9350e enables you to answer and end calls remotely by using the GN1000 RHL, or its

built-in electronic hookswitch (EHS) modes. EHS is only possible on certain telephone sys-

tems. In order to determine which telephones have the EHS feature enabled, please refer to our

website www.jabra.com. Please also refer to your telephone´s user manual for clariﬁcation.

4 modes are available

GN RHL non-EHS; works with the GN1000 RHL

DHSG e.g. Siemens and Elmeg desk telephones

AEI e.g. with Tenovis desk telephones

MSH e.g. with Alcatel desk telephones

Note: By default, the GN9350e is set to the RHL interface, which also is the correct setting if you

manually operate your handset when answering/ending calls as described in the Guide for basic set-up

and use.

To select the appropriate interface:

1. Use

to locate the hookswitch selection menu

on base display.

2. Use

to select one of the 4 interfaces from the menu.

3. Press OK to conﬁrm the interface.

Note: To use the DHSG, AEI or MSH function, connect the connec-

tion cord (accessory) to your desk telephone and the AUX port of

the GN9350e.

2.4.3 Range/power selection

Your headset offers 3 range/power modes (Normal, Low and Very Low). The Normal mode

is ideal for most users. However, if you experience interference from other communication

devices during your calls, you may want to switch to the Low or Very Low modes. Changing to

Low or Very Low power modes will reduce the range of your headset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra GN9330e Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info