Bedienungsanleitung Jabra GN9330e (Seite 8 von 46) (Deutsch, Englisch, Französisch, Spanisch)

680368

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

GN9350e

GN9330e

GN9330e USB

3.2 Neckband wearing style

With the neckband, the headset is worn on the right ear.

Note: This wearing style is available as an accessory for GN9330e and GN9330e USB.

GN9350e

GN9330e

GN9330e USB

3.3 Ear hook wearing styles

You can choose to wear the headset on either the

left or right ear. The headset can be rotated 360˚.

Changing ear hook wearing side

1. Flip the ear hook over.

2. Rotate the ear hook 180°.

GN9350e

GN9330e

GN9330e USB

3.4 Changing wearing styles

All wearing styles (headband, neckband and ear hook) are inter-

changeable.

To change any wearing style (for example, from headband to ear hook):

1. Unclip headset from the current wearing style.

2. Afﬁx the new wearing style.

GN9350e

GN9330e

GN9330e USB

3.5 Receive volume button reorientation

By default, the headset is set-up for wearing on the right ear. This means the volume

control is pushed up to increase the volume, and pushed down to decrease the volume. If

you change the wearing ear of the headset, you may also want to change the orientation of

the volume control so that volume is still increased by pressing the volume control up.

To change the headset’s volume control button orientation:

1. Make sure there is no link between the headset and the base, (indicator on headset is not

ﬂashing).

2. Press the headset’s mute button for 10 seconds.

–> The headset’s link indicator will light.

3. Determine how you prefer to increase volume (pushing the control either up or down).

4. Press the volume control either up or down (according to preference) until the headset’s

link indicator turns off.

To select the appropriate interface:

1. Place the headset in the base with its indicators facing you.

2. Press the Telephone button on the Base for 6 seconds while the

headset is in the base until the headset’s blue LED is ﬂashing rap-

idly

3. Use the volume up/down button to shiftbetween the different EHS

settings – see table below.

The base unit’s 4 battery indicators show which EHS mode

the GN9330e is in.

GN RHL

DHSG

AEI

MSH

Note: If more than 15 seconds elapses without pressing the volume + or volume – button, the last

selected interface will be activated.

4. To set the EHS mode, press the Telephone button on the Base for 6 seconds until the 4

battery indicators ﬂashes once. Now wait 5 seconds and the headset is initialized.

2.4.7 Change default phone type

You can chose to have either PC or Telephone as the default phone type

(Telephone is factory default). To change setting, press and hold the phone

type button on the base until the blue LED below the button is solid blue.

3. Wearing styles

Your headset offers headband, neckband and ear

hook wearing styles.

Note: GN9330e and GN9330e USB come with an ear

hook and a headband. Neckband is available as an

accessory.

GN9350e

GN9330e

GN9330e USB

3.1 Headband wearing styles

You can choose to wear the headset on either the

left or right ear. The headset can be rotated 360˚.

Changing boom arm wearing side (headband)

1. Rotate boom arm unit 90°.

25 %

100 %

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jabra GN9330e Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info