Bedienungsanleitung JB systems CMX-24 (Seite 7 von 49) (Deutsch, Englisch, Holländisch, Französisch)

497793

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

ENGLISH OPERATION MANUAL

JB SYSTEMS

9/93 CMX24

 HOLD

The {FADE} fader has to be placed in the highest position.

The {MASTER A} fader has to be placed in the highest position.

All the preset faders (A and B) have to be placed in the lowest position.

 Place {PRESET A 1} at 75%.

 Place {PRESET A 2} at 50%.

Press and hold the <HOLD> button above the FADE fader. The led above this button is lit.

 Place {PRESET A 1} at 0%.

 Place {PRESET A 2} at 100%.

 Place {PRESET A 3} at 75%.

 Place {PRESET A 4} at 100%.

The light effects keep the actual intensity.

Release the <HOLD> button.

The light effects will adapt directly to the new intensities.

Using the HOLD button you can maintain the current scene while setting the next scene.

Move the {FADE} fader until the display shows [10.0] (a fade time of 10 seconds)

Press and hold the <HOLD> button.

 Place {PRESET A 1} at 100%.

 Place {PRESET A 2} at 10%.

 Place {PRESET A 3} at 75%.

 Place {PRESET A 4} at 0%.

Release the <HOLD> button.

The scène will change slowly (within 10 seconds) from the previous to the next. You’ll get a perfect fade. The

HOLD button always works despite of the current mode.

 DOUBLE PRESET MODE:

In this mode you can use the control as an 12 channel A-B control. Change the mode to double preset:

 Press and release <MODUS SELECT/REC SPEED> until the [DOUBLE PRESET] lamp will be

lit above the master A and master B faders.

Set the following faders:

 Place {PRESET A 1} fader at 100%

 Place {PRESET A 2} fader at 50%

 Place {PRESET A 3} fader at 25%

 Place {PRESET A 4 - 12} faders at 0%

 Place {PRESET B 1} fader at 0%

 Place {PRESET B 2} fader at 50%

 Place {PRESET B 3} fader at 75%

 Place {PRESET B 4} fader at 100%

 Place {PRESET B 5} fader at 50%

 Place {PRESET B 6 - 12} faders at 0%

 Place {MASTER A} fader at 0% (lowest position!!!)

 Place {MASTER B} fader at 0% (highest position!!!)

No lamps will be lit.

Move the {MASTER A} fader slowly to 100% (highest position). Channels 1 to 3 will be lit immediately to

100%, 50% and 25%

Move {MASTER A} fader and {MASTER B} fader simultaneously to the lowest position. Master A will

change to 0% and Master B will change to 100%. Channels 1 to 5 will be lit at 0%, 50%, 75%, 100% and

50%. You have made a fade from the first to the second scene.

You can change this scene by moving the PRESET B faders. Moving the PRESET A faders doesn’t change

anything.

Now, you can set the PRESET A faders to a new scene.

ENGLISH OPERATION MANUAL

JB SYSTEMS

10/93 CMX24

Move {MASTER A} fader and {MASTER B} fader simultaneously to the highest position. Master A changes

to 100% and Master B changes to 0%. You will a slow fade from the first scene to the second scene. You

are working in the A-B preset mode.

IMPORTANT: Move the {MASTER A} fader to 100% (highest position) and the {MASTER B} fader to 100%

(lowest position). The CMX24 will choose for the highest values.

 Channel 1 at100%

 Channel 2 at 50% (A:50% is higher then B:25%)

 Channel 3 at 75% (B:75% is higher then A:25%)

This only works when BOTH masters are set at 100%. The highest intensity has priority

 PARK

Set {MASTER A} fader and {MASTER B} fader at 50%, middle position. The scène is a combination of both

presets.

Press and hold the <PARK> button above the Master B fader. Master B will be set at 100% ( this is visible

on the green leds). When a fade time is set, this will happen slowly.

Press and hold the <1-24> button above the Master A fader. Master A will be set at 100% ( this is visible on

the green leds). When a fade time is set, this will happen slowly.

 CHASE/SCENES mode

This control mode allows you to store a scène or a chase of 24 channels in every Preset B fader. The

CMX24 has 4 pages, so you can store altogether 48 scenes/chases.

You can activate this mode like this:

 Press and release the <MODUS SELECT/REC SPEED> button until the [CHASE SCENES]

lamp is lit above the master A/B faders.

Concepts:

 Scene/Chase:

A scène is 1 setting of the intensity of the 24 channels. This is in fact a chase with 1 scene. Only this setting

will be showed constantly.

A chase contains multiple scenes and each scene contains the intensity for 24 channels. The scenes will be

showed one by one (and you can set the speed/fade time).

You have 4 pages with each 12 PRESET B faders which each can contain a scene or a chase. So you can

store48 chases/scenes.

 Record mode:

The CMX24 can work in 3 modes:

o Safe mode, in this mode you can’t change the programs

o Program mode, in this mode you can save/erase programs

o Edit mode, in this mode you can change programs

Safe mode and program mode are always available, whether you are working in Single Preset, Double

Preset or Chase/Scenes mode. The Edit mode is only available in the Chase/Scenes mode. Next drawing

shows you how you can change from one modus to another.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JB systems CMX-24 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info