Bedienungsanleitung JB systems CMX-24 (Seite 8 von 49) (Deutsch, Englisch, Holländisch, Französisch)

497793

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

ENGLISH OPERATION MANUAL

JB SYSTEMS

11/93 CMX24

o How to recognize the mode:

 Safe mode : red lamp above the <RECORD/SHIFT> button isn’t lit.

 Program mode : red lamp above the <RECORD/SHIFT> button is lit.

 Edit mode: yellow lamp above Preset B fader is lit, despite of the position of the

fader.

 Working memory

During the programming (program mode) you will use the working memory. You will store the setting of light

effects/lamps in this memory and afterwards to you will assign this setting to a Preset B fader. The working

memory will maintain his content until you assign or erase (<RECORD/KILL> + <REC CLEAR>) the

settings.

This memory isn’t used in Edit mode, there you change the setting of light effects/lamps that are already

stored in a Preset B fader.

In the next paragraphs, the methods to program and change chases/scenes are explained.

 Activate program mode

Activate Program mode

o Press and hold the <RECORD/SHIFT> button.

o Press and release the <PRESET A 1> button

o Press and release the <PRESET A 5> button

o Press and release the <PRESET A 6> button

o Press and release the <PRESET A 8> button

o Release the <RECORD/SHIFT> button

The red lamp above the RECORD/SHIFT button is lit.

!! This mode will stay activated, even if the CMX24 is turned off, until you leave the mode. It’s advised

to leave this mode as soon as the scenes are programmed/changed. Doing this, you can avoid that

other people, who are not used to work with the controller, will change your program.

 Leave program mode, go to secured mode

To leave the program mode:

 Press and hold the <RECORD/SHIFT> button

 Press and release the <KILL/REC EXIT> button.

 Release the <RECORD/SHIFT> button

The red lamp above the RECORD/SHIFT button goes out.

If the lamp doesn’t go out, it means that you are in Edit mode, repeat the complete procedure.

 Delete all

You can delete the complete memory by doing this:

ENGLISH OPERATION MANUAL

JB SYSTEMS

12/93 CMX24

Activate the program mode

 Press and hold the <RECORD/SHIFT> button

 Press and release the <PRESET A 1> button

 Press and release the <PRESET A 5> button

 Press and release the <PRESET A 6> button

 Press and release the <PRESET A 8> button

 Release the <RECORD/SHIFT> button

The lamp above the RECORD/SHIFT button is lit.

!! The next procedure will delete the complete memory. Remember there is no way back!!

Delete the complete memory:

 Press and hold the <RECORD/SHIFT> button

 Press and release the <PRESET A 1> button

 Press and release the <PRESET A 3> button

 Press and release the <PRESET A 2> button

 Press and release the <PRESET A 3> button

 Release the <RECORD/SHIFT> button

 Record a Scene

(ONLY possible in program mode.)

Be sure that the work memory is empty:

 Press and hold the <RECORD/SHIFT> button

 Press and release the <PAGINA/RECCLEAR> button

 Release the <RECORD/SHIFT> button

Make your settings:

 If you want to set only 12 channels, u can use the Preset A faders.

 If you want to set 24 channels, you first have to select the Single Preset mode by using the

<MODUS SELECT/REC SPEED> button. Set your channels by using the Preset A and Preset B

faders.

Example:

 Channel 1 = 100%

 Channel 2 = 27%

 Channel 3 = 60%

 Channel 4 to channel 8 = 0%

 Channel 9 = 72%

 Channel 10 = 30%

 Channel 11 = 0%

 Channel 12 = 95%

Record this preset in the work memory:

 Press and release the <RECORD/SHIFT> button

 The display shows [001]

001 on the display indicates that you have recorded 1 scene in the working memory.

Store the content of the working memory in the Preset B 1 fader of page 1:

 Select page 1 by pressing several times the <PAGINA/REC CLEAR> button till the lamp “1” is

lit.

 Press and hold the <RECORD/SHIFT> button

 Press and release the <PRESET B 1> button

 Release the <RECORD/SHIFT> button

You have now stored a scene in the PRESET B 1 fader of page 1. The working memory has been deleted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JB systems CMX-24 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info