ENGLISH USER MANUAL
JB SYSTEMS® 10/12 EZ-CON 192
e. Press the [MUSIC/BANK COPY] (9) button.
f. Press the [MIDI/REC] (26) button, all LEDs will blink three times indicating that the requested
operation has been performed.
g. Press and hold the [PROGRAM] (25) button for some seconds to exit program mode. The LED
will turn off.
PLAYBACK OF SCENES
There are three modes in which you can playback scenes:
1. Manual Mode: You can select and show one or more scenes manually.
a. When the power is turned on, the unit starts automatically in manual mode.
b. Check if the [MANUAL] mode LED (13) is lit.
c. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
d. Use the [BANK ▲/▼] (14) button to select the bank with the scenes you wish to run.
e. Press the [SCENE] (6) button corresponding to the scene you wish to display.
f. Eventually repeat steps d and e to select others scenes.
2. Auto Mode: You can run a bank of programmed scenes in sequence. You can use the
[OVERRIDE] (11) button, see further for more information.
a. Press the [AUTO/DEL] (8) button to enter the [AUTO] mode. The [AUTO] LED (13) turns on.
b. Use the bank [BANK ▲/▼] (14) button to select a bank of scenes to run.
c. After selecting the bank of scenes to run, you can use the [SPEED] (24) fader and [FADE TIME]
(23) fader to adjust the speed of the scene progression.
d. You can use the [TAP/DISPLAY] (16) button to set the speed instead. The time between the last
two taps equals the length of time between steps. This setting will stay in effect until the
[SPEED] (24) fader is moved.
e. Press the [AUTO/DEL] (8) button to exit [AUTO] mode.
3. Music Mode: You can run a bank of programmed scenes to the beat of the music. You can use the
internal microphone or add an external music signal. You can use the [OVERRIDE] (11) button,
see further for more information.
a. Press the [MUSIC/BANK COPY] (9) button to activate [MUSIC] mode. The [MUSIC] LED (13)
turns on.
b. Use the bank [BANK ▲/▼] (14) button to select a bank of scenes you wish to run. The scenes
selected will run through sequentially to the beat of the music.
c. Press the [MUSIC/BANK COPY] (9) button again to exit music mode.
PLAYBACK OF CHASES
There are three modes in which you can playback chases:
1. Manual Mode: You can select and show a chase manually.
a. When the power is turned on, the unit starts automatically in manual mode.
b. Check if the [MANUAL] mode LED (13) is lit.
c. Verify that the [BLACKOUT] LED (17) is not blinking. If it is, press the [BLACKOUT] (17) button
once to exit blackout mode.
d. Select the [CHASE] (15) you want to use. The LCD display (12) shows the chase number.
e. Press the [TAP/DISPLAY] (16) button, the LCD display (12) now shows the STEP-numbers of
the selected chase.
f. Use the [BANK ▲/▼] (14) buttons to manually show the different steps of the chase.
g. Eventually select another chase and repeat steps e and f. (pressing the same chase a second
time unselects it)
