Bedienungsanleitung JBL Intonato 24 (Seite 91 von 104) (Englisch)

810155

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Page 89

INTONATO | 24 Operation Manual

Networking

This section of the manual provides basic information on network settings, network security, and

network troubleshooting. It also covers the HiQnet NetSetter application, which is used to assign a

static IP address to the Intonato 24 and resolve HiQnet setting conﬂicts.

Networking Overview

Below is a brief description of the most common network settings.

• IP Address

An IP address is an identiﬁer for a computer or device on a TCP/IP network. Each device in a

network has its own IP address to identify it (e.g., 126.126.17.42). Networks using the TCP/IP

protocol route messages based on the IP address of the destination. An IP address is made of

four numbers separated by periods. Each number can be 0 (zero) to 255. The last number should

not be a 0 (zero) or 255. For example, 126.126.17.1 could be an IP address. 126.126.17.0 would

not be a valid IP address.

A TCP/IP or IP address has two parts: the Network ID and the Host ID. The Network ID identiﬁes

the network, and the Host ID identiﬁes either the subnet and device, or just the device if there is no

subnet. The subnet mask is a code that indicates which part of the TCP/IP address is the Network

ID and which part is the Host ID. In subnet-mask code, 255 identiﬁes the part of the address

that is the Network ID. For example, suppose the IP address of a device is 192.168.xx.yy and

the subnet mask is 255.255.x.y. That means, “192.168” is the Network ID. The remaining set of

numbers (xx.yy) is the Host ID. If the network stands alone (it is not part of a larger network) then

the Host ID identiﬁes each device in the network. If the network is part of a venue’s larger network,

the network is actually a sub-network or subnet.

• Subnet

A subnet is a small network within a larger network. For example, a TCP/IP network in a single

area might be a subnet of a venue’s larger network, which could include computers throughout

the building. Or, a network might be divided into multiple subnets. For example, a large installation

may have one subnet per rack or room.

• DHCP (Dynamic Host Conﬁguration Protocol)

DHCP is a protocol for automatically assigning IP addresses to devices on a network. With

dynamic (DHCP) addressing, a device might have a different IP address every time it connects to

the network. DHCP relies on a DHCP server to assign and manage IP addresses. Most network

routers come equipped with a built-in DHCP server.

• Gateway

A gateway is used to connect two different networks and allow packets to be passed between

them. In a typical home network, the router provides the “gateway” connection between the

local area network (LAN) and Internet (WAN) so they can communicate. A gateway can translate

between one network system or protocol and another.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Intonato 24 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info