Bedienungsanleitung Jotul GF 400 (Seite 12 von 20) (Englisch)

467831

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

User Information

General

Assembly, installation, maintenance and gas conversion

(if required) must be performed by a qualified person in

accordance with the instructions for assembly, Installa-

tion and use enclosed with the product. The installation

may only be operated after it has been inspected by a

qualified person and a certificate of completion has been

issued.

The Installation should be carried out in accordance

with the Building Regulations which include the follow-

ing standards for installation and maintenance of flues,

ventilation and installation of Gas Fires. For UK BS5440:1,

BS5440:2, BS5871 for Republic of Ireland IS813, ICP3, IS327

This appliance incorporates a spillage monitoring

device (TTB) this device will shutdown the appliance in

the event of interruption to the evacuation of combustion

products. I.e. Flue blockage.

If the appliance spillage monitoring device (TTB)

shuts down the appliance repeatedly the appliance

should not be used and a qualified service engineer

should be called for service.

The ceramic fuel effect should only be arranged by

qualified service engineer and under no circumstances

should extra elements be added to the fuel effect. I.e.

Extra logs or Coals

The appliance should be serviced annually by a quali-

fied service engineer and should include attention to the

appliance, installation pipe work and the inspection and

cleaning if required of the flue system.

The minimum clearance to combustible material in

front of the appliance is 600 mm.

Curtains may not be placed within 600 mm above

the appliance.

A combustible shelf may not be placed over the appli-

ance if it is within 520mm

This appliance becomes hot in use so it advisable to

keep young children, the aged or infirm and animals at a

safe distance using a fireguard conforming to BS6539 or

BS6778 to provide extra protection.

Operating Instructions

Lighting

Note! Odors when using the stove:

When used for the first time, the appliance may emit

an irritating gas that may smell a little. The gas is not

toxic, but the room should be thoroughly aired out. During

first time use, it may take a little while before the gas tube

is cleared of air, but subsequently the appliance should

function as described in the lighting instruction. The ap-

pliance operates with the aid of a pilot flame, which is lit

manually according to the lighting instruction.

Prior to lighting:

Check the area around the appliance for possible gas

leaks/odors. Especially check near the floor, since propane

is heavier than air and would gather close to the floor in

the event of a leakage. (Note: Natural gas is lighter than

air and will gather under the ceiling). If you detect an odor

of gas, see warning under: Safety precautions.

Only use your hands to operate the control knobs;

do not use tools. If you are unable to turn or push in the

control knob, do not use force. Call for service.

Do not use the appliance if any part of it has been

submerged in water. Call for service to replace the parts

that have been in water.

Lighting Instructions

Lighting the Pilot Flame

The valve control knobs are located on the front of the ap-

pliance behind the control cover plate. See fig. 23.

The Burner ON/OFF switch is located on the rear on the

left towards the top of the appliance. See fig. 24. This

switch has three settings ON/OFF/STAT the STAT position

is for use of a remote control thermostat, not available at

present, and this setting should not be used.

1. Place the ON/OFF switch to “OFF” position. Make sure

the gas valve on the pipeline to the appliance is open.

2. Push in the gas control knob on the front of the valve (“B”,

fig. 23), and turn clockwise to the OFF position, .

Note: It is impossible to turn the gas control knob un-

less it is pushed in a little. Do not use force.

3. Push in the gas control knob (B) a little and turn coun-

ter-clockwise to the ignition position, .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jotul GF 400 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info