ACRO 38
4.4 Sub-Trim Adjustment (Function Mode)
The Sub-Trim Adjustment Function allows you to electronically
fine tune the centering of your servos. Individually adjustable for
all eight channels, with a range of + or - 125% (+ or - 30
degrees servo travel).
Caution: Do not use excessive sub-trim adjustments as it is
possible to overrun your servo's maximum travel.
In Function Mode, use the UP or DN key to select the Reverse
Switch function and access by pressing the UP and DN keys
simultaneously.
4.3 Reverse Switch (Function Mode)
The Reverse Switch is an electronic means of reversing the throw
(direction) of a given channel (servo). All eight channels of the
XP8103 offer reversible servo direction. This will ease set-up
during servo installation in your aircraft.
In Function Mode, use the UP or DN key to select the Reverse
Switch function and access by pressing the UP and DN keys
simultaneously.
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Use + or - to
change
(normal/reverse)
Channel Selection
(1-8)
Reset travel
direction to
factory preset
(normal)
To Sub-Trim
Adjustment function
To Dual Rate/
Exponential function
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
Increase or
decrease
sub-trim value
(L&R/U&D)
Channel Selection
(press to
manipulate arrow)
Press to reset
Sub-trim value to
factory preset (0)
Press to display
channels 1-4
and 5-8
(2 Screens)
