Bedienungsanleitung Juki DDL8700B-7 (Seite 36 von 51) (Englisch)

614555

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

– 34 –

Input function list

Function

code

Abbre-

viation

Function item Remarks

0 noP No function (Standard setting)

1 HS Needle up / down compensating

stitching

Every time the switch is pressed, normal feed stitching by half

stitch is performed. (Same operation as that of up / down com-

pensating stitching switch on the panel.)

2 bHS Back compensating stitching Reverse feed stitching is performed at low speed while the

switch is held pressing.

3 EbT Function of canceling once reverse

feed stitching at the end of sewing

By depressing the back part of the pedal after pressing the

switch, operation of reverse feed stitching is canceled once.

4 TSW Thread trimming function This function is actuated as the thread trimming switch.

5 FL Presser foot lifting function This function is actuated as the foot lifter switch.

6 oHS One stitch compensating stitching Every time the switch is pressed, one stitch stitching operation

is executed.

7 SEbT Function of cancel of reverse feed

stitching at start/end

By operating the optional switch, ineffective/effective can be

alternately changed over.

8 Ed Material edge sensor input This function works as the input signal of material edge sensor.

9 LinH Function of prohibiting depressing

front part of pedal

Rotation by pedal is prohibited.

10 TinH Function of prohibiting thread trim-

ming output

Output of thread trimming is prohibited.

11 LSSW Low speed command input This function works as low speed switch for standing sewing

machine.

12 HSSW High speed command input This function works as high speed switch for standing sewing

machine.

13 USW Needle lifting function UP stop motion is performed when switch is pressed during

DOWN stop.

14 bT Reverse feed stitching switch input Reverse feed stitching is output as long as the switch is held

pressed.

15 SoFT Soft start switch input The speed of stitch is limited to the predetermined soft-start

speed as long as the switch is held pressed.

16 oSSW One-shot speed command switch

input

This function works as one-shot speed command as long as

the switch is pressed.

17 bKoS Backward one-shot speed com-

mand switch input

Reverse feed stitching is performed in accordance with the

one-shot speed command as long as the switch is held

pressed.

18 SFSW Safety switch input Rotation is prohibited.

19 AUbT Automatic reverse feed stitching

cancellation/addition switch

Every time the switch is pressed, reverse feed stitching at sew-

ing start or reverse feed stitching at sewing end is canceled or

added.

20 CUnT Sewing counter input Every time the switch is pressed, the sewing counter value is

increased.

Connector No. Pin No. Display No. Function Initial value of No. 12

CN22 5 i.1 Reverse feed stitching switch input bT

CN20 7 i.2 Thread trimming switch input TSW

CN20 11 i.3 Low-speed revolution switch input LSSW

CN20 9 i.4 High-speed revolution switch input HSSW

CN20 5 i.5 Presser foot lifting switch input FL

Input function connectors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Juki DDL8700B-7 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info