Bedienungsanleitung Juki DDL8700B-7 (Seite 38 von 51) (Englisch)

614555

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

– 36 –

④ Needle up/down switch function changeover function (Function setting No. 22)

The needle up/down switch function can be changed over between the needle up/down compensation and

one stitch compensation.

0 : Needle up / down compensating stitching

1 : One stitch compensating stitching

⑤ Setting of the suction time of the back-tack solenoid (Function setting No. 29)

This function can change the suction time of the back-tack solenoid. It is effective to decrease the value

when the heat is high.

(Caution) When the value is excessively decreased, failure of motion or defective pitch will follow.

Be careful when changing the value.

Setting range : 50 to 500 ms <10 / ms>

⑥ Function of reverse feed stitching on the way (Function setting Nos. 30 to 33)

Functions of the limit of number of stitches and thread trimming command can be added to the touch back

switch on the sewing machine head.

Function setting No. 30 Function of reverse feed stitching on the way is selected.

0 : OFF Normal back-tack function

1 : ON Function of reverse feed stitching on the way

Function setting No. 31 Number of stitches performing reverse feed stitching is set.

Setting range : 0 to 19 stitches

Function setting No. 32 Effective condition of reverse feed stitching on the way

0 : OFF Inoperative when the sewing machine stops. (Reverse feed stitching on the way

functions only when the sewing machine is running.)

1 : ON Operative when the sewing machine stops. (Reverse feed stitching on the way

functions both when the sewing machine is running and stops.)

(Caution) Either condition is operative when the sewing machine is running.

Function setting No. 33 Thread trimming is performed when reverse feed stitching on the way is com-

pleted.

0 : OFF Without thread trimming

1 : ON Thread trimming is executed.

Application

Function setting

Output function

No.30 No.32 No.33

❶

0 0 or 1 0 or 1 It works as normal touch-back switch.

❷

1 0 0

When operating touch-back switch at the time of depressing front part of the pedal,

reverse feed stitching as many as the number of stitches specied by the function

setting No. 31 can be performed.

❸

1 1 0

When operating touch-back switch at the time of either stop of the sewing machine

or depressing front part of the pedal, reverse feed stitching as many as the number

of stitches specied by the function setting No. 31 can be performed.

❹

1 0 1

When operating touch-back switch at the time of depressing front part of the pedal,

automatic thread trimming is performed after reverse feed stitching as many as the

number of stitches specied by the function setting No. 31 has been performed.

❺

1 1 1

When operating touch-back switch at the time of either stop of the sewing machine

or depressing front part of the pedal, automatic thread trimming is performed after

reverse feed stitching as many as the number of stitches specied by the function

setting No. 31 has been performed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Juki DDL8700B-7 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info