636783
33
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
33
Cancelling the cooking time
Use the
A button to reset the cooking time to 0:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
0 button
beforehand.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The
N arrow is next to
the symbol for time function which is currently visible on the
display.
To check the
V timer, x cooking time or 0 clock, press the
0 button repeatedly until the N arrow points to the appropriate
symbol. The display shows the value for a few seconds.
Setting the clock
When the appliance has been connected to the power supply,
or after a power cut, the
N0 symbols and three zeros light up
in the display. Set the clock.
1. Press the @ or A button.
Default value
@: 12:00
Default value
A 23:59
2. Use the @ or A button to set the clock.
3. Press the 0 button. The time is set.
Changing the clock
Prerequisite: your appliance must be switched off.
1. Press the 0 button twice.
The time symbols light up in the display, the
N arrow is next
to the
0 symbol.
2. Use the @ or A button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.
Activating the childproof lock
Prerequisite: No cooking time should be set and the function
selector must be in the zero position.
Press and hold the
d button for approx. four seconds.
The
@ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the d button for approx. four seconds.
The
@ symbol on the display goes out. The childproof lock is
deactivated.
Childproof lock with automatic programmes
When automatic programmes have been set, the childproof
lock is not operational.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Requirement: Your appliance is switched off.
1. Press and hold the 0 button for several seconds.
The first basic setting appears in the display.
2. Use the @ or A button to change the basic setting.
3. Confirm by pressing the 0 button.
The next basic setting appears in the display. You can go
through all of the basic settings using the
0 button and
make changes using the
@ or A button.
4. When finished, press and hold the 0 button for several
seconds.
All settings are applied.
You can change the settings at any time.
Basic setting Options Explanation
™‚
Clock display
= on
Clock display
ƒ = off
Displays the clock
™ƒ
Signal duration
ƒ= medium = 2 minutes
= short = 10 seconds
= long = 5 minutes
Audible signal after the cooking time has
elapsed
™„
Signal volume
ƒ = medium
= low
= high
Volume of the signal
™…
Waiting time
ƒ= medium = 5 seconds
= short = 2 seconds
= long = 10 seconds
Waiting time between two separate steps,
after setting
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Junker JM46GA50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info