10
Ⅲ RINSING
FILTER
Ⅲ SHUT TAP
Ⅲ Close the steam / hot water draw-off tap (15).
Ⅲ HEATING
Ⅲ READY
5.3 Replacing the filter without display request
Rinsing, cleaning, de-scaling and filter replacement can also be
started without the corresponding request of your IMPRESSA
E80/85, if necessary, directly from the maintenance menu.
Ⅲ Press the maintenance key (9) until
RINSING is displayed
Ⅲ Turn the Rotary Switch (1) until
FILTER is displayed
Ⅲ Press the Rotary Switch (1)
Ⅲ Now the program “Replacing the filter” is activated. Now, pro-
ceed as described in Chapter 5.2 as from
REPLACE OPEN TAP
6. IMPRESSA E80/85 rinsing upon display request
When the IMPRESSA E80/85 was switched off and has
cooled down in the meantime, a rinsing operation is started
when the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatically.
Ⅲ Switch on the IMPRESSA E80/85 using the ON/OFF key
(8).
Ⅲ HEATING
Ⅲ PRESS
RINSE
Ⅲ Press the maintenance key (9).
Ⅲ RINSE
Ⅲ READY
6.1 IMPRESSA E80/85 rinsing without display request
Ⅲ Press the maintenance key (9) until
RINSE is displayed
Ⅲ Press the Rotary Switch (1)
Ⅲ RINSE
7. Adjusting the water quantity for coffee
The indicated value in ML/OZ is a reference value and may
deviate from the actual value
If you press the draw-off key for 2 cups (4) the water
quantity is doubled automatically.
You can change/stop the water quantity during the draw-off
operation, too. Turn the Rotary Switch (1) until the required
ML value is displayed.
You can adjust the water quantity in steps of 5 ML using the
Rotary Switch (1).
Ⅲ READY
Ⅲ Turn the Rotary Switch (1) until the required water quantity is
displayed.
Ⅲ For example, 120 ML
