20
䡲 Turn the Rotary Switch (1) to adjust the temperature.
䡲 HIGH
䡲 Press the Rotary Switch to confirm your selection.
䡲 OK
䡲 TEMP.
䡲 Turn the Rotary Switch (1) until EXIT appears on the display.
䡲 Press the Rotary Switch (1).
䡲 SELECT
BUTTON
䡲 Turn the Rotary Switch (1) again until EXIT appears on the display.
䡲 Press the Rotary Switch (1).
䡲 BUTTONS
䡲 Turn the Rotary Switch (1) again until EXIT appears on the display.
䡲 Press the Rotary Switch (1) to exit programming mode.
䡲 READY
15.2 Filter programme item
For details, please refer to chapter 5.1 ‘Inserting the filter’.
15.3 Water hardness programme item
For details, please refer to chapter 4 ‘Adjusting the water hardness’.
15.4 Energy programme item
The IMPRESSA is equipped with the new On/Off button (21)
(= Zero-Energy Switch). This allows the machine to be fully dis-
connected from the mains. An Energy Save Mode (E.S.M.
©
) can
also be permanently set.
䡲 READY
䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲 The illuminated ring (2) is active.
䡲 Turn the Rotary Switch (1) until ENERGY – appears on the display.
䡲 Press the Rotary Switch (1).
䡲 SAVE –
䡲 Turn the Rotary Switch (1) until the following message appears on
the display:
䡲 SAVE ⻫
䡲 Press the Rotary Switch (1) again to confirm the change.
䡲 OK
䡲 ENERGY ⻫
䡲 Turn the Rotary Switch (1) until EXIT appears on the display.
䡲 Press the Rotary Switch (1) to exit programming mode.
䡲 READY
15.5 Automatic switch-off time programme item
You can program when your IMPRESSA is to switch off. Select a
time between 15 min. and 15 hrs.
䡲 READY
