Bedienungsanleitung JVC DR-M70 (Seite 29 von 68) (Englisch)

56206

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Recording

Timer recording using

the SHOWVIEW

system

You can programme the timer using the SHOWVIEW

programming numbers that are printed in your local

TV guide magazine.

1 In stop mode, press

[the SHOWVIEW button].

• If the Timer Programming list is full, the Timer

Programming mode is activated instead of the

HOWVIEW programming mode.

•Press [the SHOWVIEW button] again in the

HOWVIEW programming mode to switch to the

Timer Programming mode.

2 Set the SHOWVIEW programming

number of the programme you want

to record using [the Number

buttons], then press [ENTER].

3 Select the desired recording pattern

using [Cursor U / D], then press

[ENTER].

Once: To record a TV programme once, as you

set.

Daily: To record a TV programme at the same

time on the same channel everyday.

M-F: To record a TV programme at the same time

on the same channel from Monday through

Friday.

Weekly: To record a TV programme at the same

time on the same channel every week.

4 Select a recording channel using

[Cursor U / D], then press

[Cursor P].

• If your local channel information is programmed

in the unit’s memory, your local channel number

appears automatically.

• If your local channel information is not

programmed in the unit’s memory, “P– –” may

appear.

• If you select the channel number using

[Cursor U / D], it is stored in the unit’s

memory.

5 Select a recording speed using

[Cursor U / D], then press

[Cursor P].

6 Press [SET UP] or [the SHOWVIEW

button] to exit.

7 Press [STANDBY/ON y/I].

The icon will appear on the front panel display

and the unit enters to the timer-standby mode.

Note

• If you have not set the clock, the clock setting

window will appear after step 1. Continue from step

5 in “Clock Setting” before programming the timer.

(See page 19.)

• If the S

HOWVIEW programming number is not

available, “Code Error” is displayed and the number

will clear when you press [ENTER] in step 2.

• If the S

HOWVIEW programming number previously

set overlaps with the one you entered and the

channel is different, “Overlap” is displayed but the

timer programming will be cleared when you press

[ENTER] in step 3.

• If you enter the same S

HOWVIEW programming

number and the recording pattern which you have

already entered, the previously set programme will

be overwritten.

• If you enter the same S

HOWVIEW programming

number but a different recording pattern, it will be

saved as a new programme and added to the timer

programming list.

“Code Error” is displayed if:

• A past time is entered for start and end times.

• The S

HOWVIEW programming number cannot be

decoded.

“Overlap” is displayed if:

• There is an overlap with a timer recording

setting in different channels.

ShowView System

Please enter a ShowView No.

---------

Daily

M-F

Weekly

Once

ShowView System

Timer Programming

- - -

Date Start End CH Speed

Daily 7:30 14:15 P08

E6850ED_EN.book Page 29 Wednesday, August 3, 2005 4:02 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-M70 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-M70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info