Bedienungsanleitung JVC DR-M70 (Seite 30 von 68) (Englisch)

56206

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Recording

Hints for timer recording

• If there is a power failure or the unit is unplugged for

more than 30 seconds, the clock setting and all

timer settings will be lost.

• If there is no disc or an unrecordable disc in the tray,

the icon will flash and timer recording will not

occur. Insert a recordable disc.

• When all timer recordings are complete, the

icon flashes. To play back or eject the recorded disc,

press [STANDBY/ON y/I], and then press

[PLAY P] or [OPEN/CLOSE O].

• During timer recording or timer-standby mode (

icon appears on the front panel display), no

operations on the unit are available. To make

operations available, cancel the timer recording or

timer-standby mode ( icon disappears).

• To cancel the timer-standby mode, press

[STANDBY/ON y/I].

• If the Start and End times are same, the length of

the recording will be set for 24 hours. If the disc

becomes full during recording, the unit will turn itself

off.

• If two or more programmes overlap, “Overlap” and

the overlapped programme number will appear on

the display.

• If the Start time is earlier and the End time is later

than the current time, the recording will start

immediately after you turn the power off.

Priority of overlapped settings

The unit records programmes according to priority if

timer programmes overlap.

If the starting time is same:

• The timer programming set first (PROG. 1) has

priority.

If programming has been made at the end of the

programming (PROG. 1) currently being recorded:

• The timer programming set first (PROG. 2) has

priority. PROG. 3 will not be recorded.

If the recording time is partially overlapped:

• The timer programming with the earlier start time

(PROG. 2) has priority. PROG. 1 will start after

PROG. 2 recording is complete.

If the recording time entirely overlaps:

• The shorter timer programming (PROG. 1) is not

recorded.

Note for DVD recording

• If the recording time of two programmes overlap, or

the End time of a programme and the Start time of

another is same, the first 30 seconds (at the most)

of the subsequent programme are cut off.

If the End time of the programme currently being

recorded and the Start time of the subsequent

programme are same:

• If PROG. 1 is a DVD recorded programme, the

beginning of PROG. 2 may be cut off.

* If the cut off time exceeds 1 minute, the error

number “E40” will appear in the timer programming

list.

PROG. 1

PROG. 2

PROG. 1 PROG. 2

PROG. 2

recording

will start

after

PROG. 1

recording is

completed.

Actual

recording

Additional 30 seconds (at the most) are cut off.

PROG. 1

PROG. 2

PROG. 1 PROG. 2

PROG. 3

PROG. 2

recording

will start

after

PROG. 1

recording is

completed.

Actual

recording

Additional 30 seconds (at the most) are cut off.

PROG. 1

PROG. 2

PROG. 2 PROG. 1

Additional 30 seconds (at the most) are cut off.

Actual

recording

PROG. 1

PROG. 2

Actual

recording

PROG. 1

PROG. 2

PROG. 2PROG. 1

Actual

recording

The first 30 seconds

(at the most) are cut off.*

E6850ED_EN.book Page 30 Wednesday, August 3, 2005 4:02 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC DR-M70 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC DR-M70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info