Bedienungsanleitung JVC GR-D43 (Seite 8 von 40) (Englisch)

662641

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

GETTING STARTED

8 EN

MasterPage: Left

To turn on the camcorder, set the Power Switch to any

operation mode except “OFF (CHARGE)” while pressing

down the Lock Button located on the switch.

Choose the appropriate operation mode according to

your preference using the Power Switch.

Power-Linked Operation

When the Power Switch is set to “A” or “M”, you can also

turn on/off the camcorder by opening/closing the LCD

monitor or pulling out/pushing in the viewfinder.

INFORMATION:

The following explanations in this manual supposes the

use of LCD monitor in your operation. If you want to use

the viewfinder, close the LCD monitor and pull out the

viewfinder fully.

The date/time is recorded onto the tape at all times, but

its display can be turned on or off during playback.

(墌 pg. 14, 17)

1 Set the Power Switch to “M” while pressing down the

Lock Button located on the switch.

2 Open the LCD monitor fully. (墌 pg. 10)

3 Press the MMENU/VOL. Wheel in. The Menu Screen

appears.

4 Rotate the MMENU/VOL.

Wheel to select “n”, and press it.

The CAMERA DISPLAY Menu

appears.

5 Rotate the MMENU/VOL.

Wheel to select “CLOCK ADJ.”,

and press it. The parameter for

“Day” is highlighted.

6 Rotate the MMENU/VOL.

Wheel to input the day, and press

it. Repeat to input the month, year,

hour and minute.

7 Rotate the MMENU/VOL.

Wheel to select “BRETURN”, and

press it twice. The Menu Screen closes.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not

highlighted, the camcorder’s internal clock continues to

operate. Once you move the highlight bar to the first date/

time parameter (day), the clock stops. When you finish

setting the minute and press the MMENU/VOL. Wheel in, the

date and time begin operation from the date and time you

have just set.

1 Set the Power Switch to “A” or “M” while pressing

down the Lock Button located on the switch.

2 Make sure the LCD monitor is closed and locked. Pull

out the viewfinder fully and adjust it manually for best

viewability.

3 Turn the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

CAUTION:

When retracting the viewfinder, take care not to pinch your

fingers.

Operation Mode

Power Switch Position

A (Full Auto Recording):

Allows you to record using NO special effects or

manual adjustments. Suitable for standard recording.

The “A” indicator appears on the display.

M (Manual Recording):

Allows you to set various recording functions using the

Menus. (墌 pg. 14)

If you want more creative capabilities than Full Auto

Recording, try this mode.

There is no indication on the display.

OFF:

Allows you to switch off the camcorder.

PLAY:

● Allows you to play back a recording on the tape.

● Allows you to set various playback functions using

the Menus. (墌 pg. 14)

Date/Time Settings

POWER/CHARGE lamp

Power Switch

Lock Button

MMENU/VOL.

Viewfinder Adjustment

–

NRETUR

T/D

AUMET–/TI DA E OT

OFDEM– CO TI E

20 OK CL C 21.

J AD .

ASERA CM I

. 0 4

: 3 0

NCREON S

HTBR G

NRETUR

CL C 21

AD . 71

ASERA CM

I Y

. 0 4

: 3 0

20 .

PAUSE

Dioptre Adjustment Control

GR-D33EK.book Page 8 Thursday, October 30, 2003 9:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D43 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D43

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info