Bedienungsanleitung JVC GR-D60 (Seite 43 von 56) (Englisch)

471637

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The charger indicator on the camcorder does

not light.

• The temperature of the battery is extremely high/low.

• Charging is difficult in places subject to extremely

high/low temperatures.

¥ To protect the battery, it is recommended to charge

it in places with a temperature of 10°C to 35°C

(੬ pg. 44).

When the image is printed from the printer, a

black bar appears at the bottom of the screen.

• This is not a malfunction.

¥ By recording with “DIS” activated (੬ pg. 29) this

can be avoided.

When the camcorder is connected via the DV

connector, the camcorder does not operate.

• The DV cable was plugged/unplugged with power

turned on.

¥ Turn the camcorder’s power off and on again, then

operate it.

The memory card cannot be removed from

the camcorder.

¥ Push in the memory card a few more times

(੬ pg. 11).

A memory card cannot be played back.

• The Power Switch u is set to “ ” or “ ”.

¥ Set the Power Switch u to “PLAY” (੬ pg. 18).

• The VIDEO/MEMORY Switch 4 is set to “VIDEO”.

¥ Set the VIDEO/MEMORY Switch 4 to “MEMORY”.

The LCD monitor image is distorted.

• During playback of the unrecorded portion,

High-speed Search and still playback, LCD monitor

indications appear distorted. This is not a defect.

Images on the LCD monitor are jittery.

• The speaker volume is too great.

¥ Turn the speaker volume down (੬ pg. 14).

There is no playback picture on the

connected TV.

• Since the analogue input mode is engaged, the

camcorder is in the Record-Standby mode.

¥ Set “S/AV INPUT” to “OFF” in the Menu Screen

(੬ pg. 31).

Blocks of noise appear during playback, or

there is no playback picture and the screen

becomes blue.

¥ Clean the video heads with an optional cleaning

cassette (੬ pg. 45).

The LCD monitor, the viewfinder and the lens

have become dirty (ex. fingerprints).

¥ Wipe them gently with soft cloth. Wiping strongly

can cause damage (੬ pg. 46).

An unusual mark appears.

¥ Check the section of the manual that explains LCD

monitor/viewfinder indications (੬ pg. 50 – 53).

An error indication (E01, E02 or E06) appears.

• A malfunction of some kind has occurred. In this case

the camcorder’s functions become unusable.

¥ Remove the power supply (battery pack, etc.) and

wait a few minutes for the indication to clear. When it

does, you can resume using the camcorder. If the

indication remains even though you repeat the

above two or three times, please consult your

nearest JVC dealer. Do not eject the cassette. This

will cause damage to the tape.

An error indication (E03 or E04) appears.

• A malfunction of some kind has occurred. In this case

the camcorder’s functions become unusable.

¥ Eject the cassette once and re-insert it, then check if

the indication clears. When it does, you can resume

using the camcorder. If the indication remains even

though you repeat the above two or three times,

please consult your nearest JVC dealer.

TROUBLESHOOTING

01 GR-D70/60EK 41-56 02.12.4, 17:2943

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-D60 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-D60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info