Bedienungsanleitung JVC GR-DVL9200 (Seite 45 von 68) (Englisch)

584571

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN45

MAKE CONNECTIONS

Also refer to pg. 34 and 35.

To connect to:

A JVC VCR equipped with a remote pause

connector . . .

... connect the editing cable to the Remote

PAUSE connector.

A JVC VCR not equipped with a remote

pause connector but equipped with an R.A.

EDIT connector . . .

... connect the editing cable to the R.A.EDIT

connector.

A VCR other than above . . .

... connect the editing cable to the RM-V716U’s

PAUSE IN connector.

Insert a recorded tape into the camcorder and set the

Power Switch to “ ” while pressing down the

Lock Button located on the switch.

Turn the VCR power on, insert a recordable tape and

engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●

Before Random Assemble Editing, make sure the indications

do not appear on the TV monitor. If they do, they will be

recorded onto the new tape.

To choose whether or not the following displays appear on

the connected TV . . .

• Date/Time

..... set “DISPLAY” to “ON” or “OFF” in the Menu Screen

(Z pg. 32).

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (Z

pg. 32).

• Playback Sound Mode and Tape Speed Displays

..... set “INDICATION” to “ON” or “OFF” in the Menu

Screen (Z pg. 32).

• Playback Sound Mode, Tape Speed and Tape Running

Displays

..... set the Power Switch to “ ” or “5S”. Press MENU/

BRIGHT and set “ON SCREEN” to “ON” or “OFF” in

the Menu Screen (Z pg. 20). Then, set the Power

Switch back to “ ”. Or, press DISPLAY on the

RM-V716U remote control.

●

When using the cables, make sure you connect the end of

the cable with the core filter to the camcorder. The core

filter reduces interference.

●

Set the video out select switch of the cable adapter as

required:

Y/C : When connecting to a TV or VCR which accepts Y/

C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not

accept Y/C signals and uses an audio/video cable.

●

When editing on a VCR equipped with a DV input

connector, an optional DV cable can be connected instead

of an S-Video cable and audio/video cable.

DISPLAY

To Remote

PAUSE or

R.A.EDIT

RM-V716U

(provided)

VCR

To AUDIO, VIDEO*

and

-IN

connectors

“Y/C”/“CVBS”

video out

select switch

To PAUSE IN

Editing cable

(provided)

S-Video cable

(provided)

* Connect when an S-Video cable is not used.

** When connecting cables, open this cover.

Connector

cover**

To AV

To JLIP

(EDIT)

S-VIDEO

Core filter

If your VCR has the

SCART connector,

use the provided

cable adapter.

CONTINUED ON NEXT PAGE

Audio/Video cable

[mini-plug to RCA plug]

(provided)

ATTENTION FOR EDITING CABLE

•Be careful not to mistake it for the JLIP

cable (Z pg. 4).

•Make sure you connect the end with the

core filter to the camcorder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVL9200 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info