Bedienungsanleitung JVC GR-DVP8 (Seite 30 von 84) (Englisch)

533257

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

30 EN

Master Page: Left

To Print By Selecting Still Images And Number

Of Prints

Perform steps 1 – 8 in “To Print All Still Images

(One Print For Each)” (੬ pg. 29).

2 Press + or – to select

“CURRENT”, and press

SET/SELECT. The DPOF

screen appears.

3 Turn the SHUTTLE

SEARCH Ring to the left

(3) or to the right (5)

to select the desired file.

4 Press + or – to select the number indication (00),

and press SET/SELECT.

5 Select the number of prints

by pressing + to increase

the number, or – to

decrease the number, and

press SET/SELECT.

● Repeat steps 3 through 5

for the desired number

of prints.

● The number of prints can be set up to 15.

● To correct the number of prints, select the

image again and change the number.

6 Press + or – to select

“RETURN”, and press SET/

SELECT. The “SAVE?”

appears.

● If you did not change

any settings in step 3

through 5, the Menu

Screen reappears.

7 Press + or – to select “EXECUTE” to save the

setting you have just made, and press SET/

SELECT.

● To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

Perform steps 1 – 8 in “To Print All Still Images

(One Print For Each)” (੬ pg. 29).

2 Press + or – to select “RESET”, and press SET/

SELECT. The DPOF screen appears.

3 Press + or – to select “EXECUTE”, and press SET/

SELECT. The normal playback screen appears.

● To cancel selection, select “RETURN”.

● The number of prints is reset to 0 for all still

images.

You can initialise a memory card anytime.

After initialising, all files and data stored in the

memory card, including those which have been

protected, are cleared.

1 Set the VIDEO/MEMORY Switch to “MEMORY”.

2 Set the Power Switch to “P” while pressing

down the Lock Button located on the switch.

3 Open the LCD monitor fully, or pull out the

viewfinder fully.

4 Press MENU. The Menu

Screen appears.

5 Press + or – to select

“FORMAT”, and press

SET/SELECT. The FORMAT

screen appears.

6 Press + or – to select

“EXECUTE”, and press

SET/SELECT. The memory

card is initialised.

● When initialisation is finished, “NO IMAGES

STORED”, “NO E-MAIL CLIP STORED” or

“NO SOUND STORED” appears.

● To cancel initialisation, select “RETURN”.

CAUTION:

While performing the above, never disconnect

power, as this may cause the memory card to be

corrupted.

RETURN

SHEETS

DPOF

SHEETS

DPOF

EXECUTE

SAVE?

CANCE L

Initialising A Memory Card

CAUTION:

Do not perform any other operation (such as

turning off the camcorder) during initialisation.

Also, be sure to use the provided AC Power

Adapter/Charger, as the memory card may be

corrupted if the battery becomes exhausted during

initialisation. If the memory card becomes

corrupted initialise it.

DISPLAY

END

PROTECT

DELETE

DPOF

NO . RES E T

FORMAT

ORMA TF

EXECUTE

DATA?EX I ST I NG

ERASE ALL

RETURN

D.S.C. PLAYBACK (cont.)

GR-DVP9-8PAL.book Page 30 Friday, February 7, 2003 12:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVP8 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info