Bedienungsanleitung JVC GR-DVP8 (Seite 32 von 84) (Englisch)

533257

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

32 EN

Master Page: Left-Heading0X2

MENUS FOR DETAILED ADJUSTMENT (cont.)

4) Press SET/SELECT. The

Menu Screen returns.

● Repeat the procedure if

you wish to set other

function menus.

5) Press SET/SELECT again.

The Menu Screen closes.

NOTES:

● The “m” settings are effective when the Power

Switch is set to both “A” and “M”. However, the

menu settings can be changed only when the

Power Switch is set to “M”.

● The “q” settings are effective only when the

Power Switch is set to “M”.

● The “s” functions which are set when the Power

Switch is set to “M” are also applied when the

Power Switch is set to “P”.

● The “n” (CAMERA DISPLAY) settings are

effective even when the Power Switch is set to

“A”. However, the menu settings can be changed

only when the Power Switch is set to “M”.

● The date indication can also be turned on/off by

pressing the DISPLAY Button on the remote

control (provided). (੬ pg. 22, 50, 59)

– FA

R ET

LADE

– FA R

.WDE

– FA R

RNPE

C WI –

NDPE

W WI –

S WI

–

ORPE

D WI –

S WI

–

R/F

DIPE WA

UTPE

S WI –RETH

RECORDING MENUS

These effects let you make pro-style scene

transitions. Use them to spice up the transition from

one scene to the next.

IMPORTANT:

Some Wipe/Fader Effects cannot be used with

certain modes of Program AE with special effects.

(੬ pg. 33) If an unusable Wipe/Fader Effect is

selected, its indicator blinks in blue or goes out.

Wipe or Fader works when video recording is started

or stopped.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “M” while pressing down

the Lock Button located on the switch.

3 Open the LCD monitor fully, or pull out the

viewfinder fully.

4 Set “v” to the desired mode. (੬ pg. 31)

● The selected effect indicator appears.

5 Press the Recording Start/Stop Button to start or

stop recording. The selected Fade-in/out or

Wipe-in/out effect works.

To deactivate the selected effect…

Select “OFF” in step 4.

NOTES:

● You can select other effects for “v” during

recording.

● You can extend the length of a Wipe or Fader by

pressing and holding the Recording Start/Stop

Button.

WIPE/FADER (Factory-preset: OFF)

OFF: Disables effects.

FADER–WHITE: Fade in or out with a white

screen.

FADER–BLACK: Fade in or out with a black

screen.

FADER–B.W: Fade in to a colour screen from a

black and white screen, or fade out from colour to

black and white.

WIPE – CORNER: Wipe in on a black screen

from the upper right to the lower left corner, or wipe

out from lower left to upper right, leaving a black

screen.

WIPE – WINDOW: The scene starts in the

centre of a black screen and wipes in toward the

corners, or comes in from the corners, gradually

wiping out to the centre.

WIPE – SLIDE: Wipe in from right to left, or

wipe out from left to right.

Wipe Or Fader Effects

GR-DVP9-8PAL.book Page 32 Friday, February 7, 2003 12:35 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVP8 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info