Bedienungsanleitung JVC GR-DVX400 (Seite 54 von 104) (Englisch)

39788

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

54 EN

Master Page: Left

GR-DVX707EG_37-79.fm Page 54

The flash can be used when a snapshot is taken in

Record-Standby mode. (墌 pg. 27, 53)

● When the Power Switch is set to “A”, the flash

automatically fires if it is dark ( appears).

● When the Power Switch is set to “M”, you can

select the flash setting as follows:

● For the setting, refer to “Changing The Menu

Settings” (墌 pg. 38).

If “AUTO C” is selected...

The C Red-Eye reduction indicator lights. Press

SNAPSHOT. The flash fires twice. The first flash is

for reduction of the human eye’s red reflection and

the second flash is for the actual recording.

NOTES:

● Do not fire the flash at a person at short range.

● The flash does not fire when the flash is set to

“OFF” or when Night-Scope mode (墌 pg. 53) is

engaged, and also when the battery remaining

power is low. Moreover, the flash does not fire

when it is set to “AUTO” with GAIN UP set to

“OFF” (墌 pg. 45) and with Program AE with

special effects set to “TWILIGHT”. (墌 pg. 42)

● Although images shot with a flash tend to look

whiter than they actually are, to compensate for

this the camcorder automatically darkens the

picture when using the flash. When shooting a

subject at a distance where the flash light cannot

reach (over approx. 2 m), set the flash to “OFF” to

prevent the picture from becoming too dark or

becoming too tinted.

● The colour tone changes depending on the

background lighting conditions, such as under

fluorescent or halogen lamps.

● While charging the flash, blinks and the flash

will not fire. Although noise may appear, this is

not a malfunction and is not recorded. It can take

up to 10 seconds to charge the flash.

When a snapshot (墌 pg. 27, 53) is taken in the dark

the camcorder fires the flash and adjusts the

brightness automatically. You can also adjust the

flash brightness manually. When you find that the

snapshots you took look too bright or too dark,

adjust it manually.

1 Select “FLASH ADJ.” in MANUAL Menu, and

press the MENU Wheel in.

● The parameter appears.

2 To intensify the flash, rotate the MENU Wheel

towards “+”. To weaken the flash, rotate the

MENU Wheel towards “–”.

● Adjustment range: –3 to +3.

3 Press the MENU Wheel in. Rotate the MENU

Wheel to select “BRETURN”, and press it twice

to close the Menu Screen.

NOTE:

When you change the subject you are shooting or

the shooting location, set it back to ±0 as described

in step 2 and take a snapshot to check the flash

brightness. After doing this adjust to your desired

brightness.

Snapshot Flash (GR-DVX707/

507 only)

AUTO : Fires automatically if it is dark (

appears).

AUTO

: Fires automatically if it is dark (

appears) and reduces the Red-Eye effect

in the subject’s eyes.

ON : Always fires.

OFF : Will not fire.

OFF

Power Switch

SNAPSHOT Button

Lock Button

VIDEO/MEMORY

Switch

MENU Wheel

Flash Brightness Adjustment

(GR-DVX707/507 only)

FEATURES FOR RECORDING (cont.)

GR-DVX707EG_37-79.fm Page 54 Thursday, January 31, 2002 12:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX400 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info