Bedienungsanleitung JVC GR-DVX400 (Seite 55 von 104) (Englisch)

39788

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

EN 55

Master Page: Right

GR-DVX707EG_37-79.fm Page 55

The camcorder’s Full Range AF system offers

continuous shooting ability from close-up (as close

as approx. 5 cm to the subject) to infinity.

However, correct focus may not be obtainable in the

situations listed below (in these cases perform

“Manual Focus”):

● When two subjects overlap in the same scene.

● When illumination is low.*

● When the subject has no contrast (difference in

brightness and darkness), such as a flat, one-

colour wall, or a clear, blue sky.*

● When a dark object is barely visible in the

viewfinder.*

● When the scene contains minute patterns or

identical patterns that are regularly repeated.

● When the scene is affected by sunbeams or light

reflecting off the surface of a body of water.

● When shooting a scene with a high-contrast

background.

* The following low-contrast warnings appear

blinking: , , and

NOTES:

● If the lens is smeared or blurred, accurate focusing

is not possible. Keep the lens clean. (墌 pg. 91)

When condensation occurs, wipe with a soft cloth

or wait for it to dry naturally.

● When shooting a subject close to the lens, zoom

out first. (墌 pg. 20) If zoomed-in in the auto focus

mode, the camcorder may automatically zoom

out depending on the distance between the

camcorder and the subject. This will not occur

when “TELE MACRO” is set to “ON”.

(墌 pg. 38, 46)

NOTE:

If you are using the viewfinder, you should already

have performed “Viewfinder Adjustment”

(墌 pg. 12).

1 Set the Power Switch to “M” while pressing down

the Lock Button located on the switch.

2 Press FOCUS. The manual focus indicator

appears.

3 To focus on a further subject, rotate the MENU

Wheel towards “+”. The “ ” indicator appears

and blinks.

To focus on a nearer subject, rotate the MENU

Wheel towards “–”. The “ ” indicator appears

and blinks.

4 Press the MENU Wheel in. Focus adjustment is

complete.

● To reset to Auto Focus, press FOCUS twice or

set the Power Switch to “A”.

● If FOCUS is pressed once, the camcorder will

enter the focus adjustment mode again.

NOTES:

● Be sure to focus the lens in the maximum

telephoto position when you use the Manual

Focus mode. If you focus in on a subject in the

wide-angle position, sharply focused images

cannot be obtained when zoomed up because the

depth-of-field is reduced at longer focal lengths.

● When the focus level cannot be adjusted any

further or closer, “ ” or “ ” will blink.

Auto Focus

Focus detection zone

Manual Focus

Manual focus

indicator

While focusing on a

further subject

Manual focus

indicator

While focusing on a

nearer subject

GR-DVX707EG_37-79.fm Page 55 Thursday, January 31, 2002 12:19 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-DVX400 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GR-DVX400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info