Bedienungsanleitung JVC GR-X5AC (Seite 40 von 64) (Englisch)

46752

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

FEATURES FOR RECORDING

40 EN

MasterPage: Left

Makes dark subjects or areas even brighter than

they would be under good natural lighting.

Although the recorded image is not grainy, it may

look as if it is strobing due to the slow shutter

speed.

1 Set the power switch to “M”.

2 Press NIGHT (4/9) so that the Night-Scope

indicator “ ” appears.

● The shutter speed is automatically adjusted to

provide up to 25 times sensitivity.

● “ ” appears beside “ ” while the shutter speed

is being automatically adjusted.

To deactivate Night-Scope

Press NIGHT (4/9) again so that the Night-

Scope indicator disappears.

NOTES:

● During Night-Scope, the following functions or

settings cannot be activated and its indicator

blinks or goes out:

• Some modes of “Program AE” or “Special

Effects” (੬ pg. 44, 45)

• “Snapshot Flash” (੬ pg. 39)

• “GAIN UP” in CAMERA menu (੬ pg. 34)

• “DIS” in MANUAL menu (੬ pg. 34)

● During Night-Scope, it may be difficult to bring the

camcorder into focus. To prevent this, use of a

tripod is recommended.

Once the camcorder is set, the camcorder

operator can become part of the scene in a

more natural way, adding the final touch to a

memorable picture.

1 Set the power switch to “M”.

2 Set “SELF-TIMER” to

“ON ”. (੬ pg. 33, 35)

● The “ ” indicator

appears.

3 For video recording,

press the recording start/

stop button.

● The tally lamp starts blinking.

● After 15 seconds, the beep sounds and video

recording starts. The tally lamp stays on.

To stop self-timer recording, press the recording

start/stop button again.

● The camcorder re-enters record-standby mode.

3 For snapshot, press SNAPSHOT.

● The tally lamp starts blinking.

● After 15 seconds, the beep sounds and a

snapshot is taken. The tally lamp turns off. After

that, the camcorder re-enters record-standby

mode.

4 To end self-timer recording, select “OFF” in

step 2.

NOTE:

If “BEEP” and “TALLY” are set to “OFF” (੬ pg. 35),

the beep does not sound and the tally lamp does

not light.

Record a vacation or an important event in 5-

second clips to keep the action moving. This

function is available only for video recording.

1 Set “5S” to “5S”. (੬ pg. 33, 35)

● The “5S” indicator appears.

2 Press the recording start/stop button to start

recording, and after 5 seconds the camcorder

enters record-standby mode automatically.

● Even if you press the recording start/stop button

again within 5 seconds after recording starts,

record-standby mode is not engaged.

3 To exit the 5S mode, select “OFF” in step 1.

To take a snapshot in the 5-second recording

mode

Instead of pressing the recording start/stop

button in step 2, select the desired snapshot

mode in CAMERA menu (੬ pg. 34), then press

SNAPSHOT. The camcorder records a 5-

second still. When “5S” is set to “Anim.”, this

function is not available.

NOTE:

When “5S” is set to “Anim.”, the 5-second recording

mode is not available. Animation recording of a few

frames only is taken instead.

Night-Scope

Self-Timer

MANUAL

SELF-TIMER

OFF

–

5-Second Recording

GR-XASIA_11Advanced.fm Page 40 Thursday, April 14, 2005 2:33 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GR-X5AC Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info