46752
42
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
FEATURES FOR RECORDING
42 EN
MasterPage: Left
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
When shooting a moving subject.
When the distance to the subject changes (so its
size in the LCD monitor changes), such as when
the subject is backing away.
When shooting on a reflective natural background
such as at the beach or when skiing.
When shooting objects under a spotlight.
When zooming.
1 Set the power switch to “M”.
2 Press EXPOSURE.
The exposure control indicator appears.
3 Adjust zoom so that the subject fills the LCD
monitor, then press and hold SET on the manual
focus dial for over 2 seconds. The exposure
control indicator and the “ ” indication appear.
4 Press SET on the manual focus dial. The “
indication changes to “ ” and the iris is locked.
To return to automatic iris control
Press EXPOSURE twice. Or, set the power
switch to “A”.
The exposure control indicator and “
disappear.
To lock the exposure control and the iris
After step 2, adjust the exposure by rotating the
manual focus dial. Then lock the iris in steps 3
and 4. For automatic locking, Press
EXPOSURE twice in step 2. The exposure
control and the iris become automatic.
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1 Set the power switch to “M”.
2 Press BACKLIGHT (8) so that the backlight
compensation indicator “ ” appears.
To cancel backlight compensation
Press BACKLIGHT (8) twice so that the “
indicator disappears.
NOTE:
Using backlight compensation may cause the light
around the subject to become too bright and the
subject to become white.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor.
1 Set the power switch to “M”.
2 Press BACKLIGHT (8) twice so that the
Spot Exposure Control indicator “ ” appears.
A spot metering area frame appears at the
centre of the LCD monitor.
3 Press 3 or 5 to select the desired spot
metering area.
4 Press SET.
Spot exposure control is engaged.
Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step 3, press and hold SET over 2
seconds. The “ ” indication appears and the
iris is locked.
To cancel spot exposure control
Press BACKLIGHT (8) once so that the “
indicator disappears.
NOTES:
You cannot use the spot exposure control at the
same time with following functions.
“STROBE” in “EFFECT” ( pg. 45)
Digital zoom ( pg. 19)
Manual exposure control
Depending on the shooting location and condition,
optimum result may not be attained.
Iris Lock
Backlight Compensation
Spot Exposure Control
GR-XASIA.book Page 42 Tuesday, April 12, 2005 8:52 PM
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GR-X5AC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info