Bedienungsanleitung JVC GZ-RX645 (Seite 127 von 179) (Englisch)

663423

127

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

Troubleshooting

Direct Monitoring

Trouble Action

Unable to connect to camera.

Check whether the Wi-Fi connection is established successfully.

Check whether Wi-Fi is connected to “DIRECT-**EVERIO”.

Check whether the smartphone is connected to the camera.

Try again after powering off and on the camera and the terminal (smartphone).

If the smartphone supports Wi-Fi Direct, try generating the QR code and set “ENFORCED GROUP

OWNER” to “OFF”.

This is the “Connection by Wi-Fi Protected Setup (WPS)” method.

Video or audio is interrupted or delayed

the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.

Try to change the place and time to locate an environment with good signal strength.

The unit turns off automatically.

prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days

of continuous usage.

Unable to set focus.

When not monitoring from a smartphone, the focus of the camera is fixed.

Even when monitoring from a smartphone, the focus of the camera will be fixed if not operated for more

than 3 hours. (Focus works again when the camera is operated.)

Connection gets disconnected, or a

“UNABLE TO CONNECT” message is

displayed

Establish a connection again at a place with good signal strength. Transmission speed may drop, or a

connection may fail if the devices are placed too far away from each other, when there are objects in

between, or when a microwave oven or other wireless devices are in use.

If a connection cannot be re-established, restart the terminal (smartphone).

You may have difficulty establishing a connection via direct monitoring in an environment where the

camera

is placed away from the smartphone. In this case, connect using the access point (wireless LAN

router).

Access Point (Wireless LAN Router)

Trouble Action

Unable to connect to access point (wireless

LAN router).

Check that the password is correct.

the access point has been registered using the QR code, check that the SSID or authentication method

is correct.

Unsure of which access point (wireless LAN

router) to use.

the settings of the access point (wireless LAN router) have never been changed from their default values,

check the following.

- Check whether an adhesive label indicating the initial settings is attached to the body of the access point

(wireless LAN router).

- Check for the default settings in the instruction manual of the access point (wireless LAN router).

Unsure of password for the access point

(wireless LAN router).

Refer to the instruction manual of the access point (wireless LAN router) in use.

Unable to connect via Wi-Fi Protected Setup

(WPS).

Simple

connection methods other than WPS are not supported. Register an access point using QR code

before making a connection.

Turn off the power of the camera, then try again.

Using Wi-Fi

127

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC GZ-RX645 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC GZ-RX645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info