663423
129
Zoom out
Zoom in
Vorherige Seite
1/179
Nächste Seite
OUTDOOR MONITORING (connection from the Internet)
Trouble Action
The URL (WAN) does not appear in the
network information.
0
The URL (WAN) will not appear if dynamic DNS (DDNS) is not set on the camera.
To set the dynamic DNS (DDNS), perform the following steps.
1. Obtain an account with JVC dynamic DNS (DDNS) service using your computer.
2. Log in to JVC DNS and obtain the dynamic DNS (DDNS) service.
3. Set the username and password for the dynamic DNS (DDNS) obtained on the camera.
* Only the JVC dynamic DNS (DDNS) service can be set on this camera.
0
The URL (WAN) will not appear if dynamic DNS (DDNS) is not set on the camera.
To set the dynamic DNS (DDNS), perform the following steps.
1. Obtain an account with JVC dynamic DNS (DDNS) service using your computer.
https://dd3.jvckenwood.com/user/
2. Log in to JVC DNS and obtain the dynamic DNS (DDNS) service.
3. Set the username and password for the dynamic DNS (DDNS) obtained on the camera.
* Only the JVC dynamic DNS (DDNS) service can be set on this camera.
Unable to access the entered URL. (cannot
be found)
0
If
there are two or more routers (or two or more routing functions) along the route between the camera and
the WAN (global IP address), connection via internet cannot be used.
0
Check that the dynamic DNS username and password are correct.
0
The access point (wireless LAN router) in use is not compatible with UPnP, or UPnP is turned off. Check
the instruction manual of the access point (wireless LAN router) in use, and turn on UPnP.
0
The “UPnP” of the camera is set to “OFF”. (By default, it is set to “ON”.)
Generate a QR code and set “UPnP” to “ON”.
0
Check whether a terminal that uses port 80 (such as web servers) has been set in the network, or if a
specific terminal has been set to use port 80 on the access point (wireless LAN router). In such case,
change the “HTTP Port” to other than 80 and generate a QR code.
0
Try again after powering off and on the camera and the terminal (smartphone).
Video or audio is interrupted or delayed
0
If
the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.
0
Try to change the place and time to locate an environment with good signal strength.
The unit turns off automatically.
0
To
prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days
of continuous usage.
Unable to set focus.
0
When not monitoring from a smartphone, the focus of the camera is fixed.
0
Even when monitoring from a smartphone, the focus of the camera will be fixed if not operated for more
than 3 hours. (Focus works again when the camera is operated.)
Connection gets disconnected, or a
“UNABLE TO CONNECT” message is
displayed
0
Establish a connection again at a place with good signal strength. Transmission speed may drop, or a
connection may fail if the devices are placed too far away from each other, when there are objects in
between, or when a microwave oven or other wireless devices are in use.
0
If a connection cannot be re-established, restart the terminal (smartphone).
Screen does not refresh or remains black
0
Check if the camera and the access point are properly connected.
Images cannot be detected on the terminal (smartphone) if the camera is disconnected from the access
point halfway through.
LUPnP” is displayed. This appears when UPnP has failed.
0
Check whether the wireless LAN router in use is compatible with UPnP.
(Refer
to the instruction manual of the wireless LAN router in use, or consult the manufacturer of the router.)
0
When the wireless LAN router in use is compatible with UPnP, turn on the UPnP function.
0
If the icon does not disappear even when the UPnP function is enabled, turn off and on the power of the
wireless LAN router in use as well as the camera, then try again.
Unable to connect although “LUPnP” is
displayed.
0
When “UPnP” is set to “OFF”, “LUPnP” will not appear. In such cases, set “UPnP” to “ON”.
0
When the port 80 has been used by other devices via UPnP, a connection cannot be established.
Reconnect the camera.
Using Wi-Fi
129
129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GZ-RX645 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC GZ-RX645

JVC GZ-RX645 Bedienungsanleitung - Deutsch - 180 seiten

JVC GZ-RX645 Kurzanleitung - Deutsch - 92 seiten

JVC GZ-RX645 Kurzanleitung - Holländisch - 92 seiten

JVC GZ-RX645 Bedienungsanleitung - Holländisch - 184 seiten

JVC GZ-RX645 Kurzanleitung - Französisch, Italienisch, Portugiesisch, Spanisch - 92 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info