Bedienungsanleitung JVC HR-S5902 (Seite 14 von 24) (Englisch)

658620

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

— 14 —

Page 14 October 31, 2002 9:59 am

Program overlap warning display

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”

appears, you have another program overlapping the program you

have just made. The Program Check screen appears and

conflicting programs will start blinking.

Example:

Program 1 (you have just made) and Program 4 overlap each other

Select program to modify

Press

, then press OK or

● You can only select one of the

overlapping programs.

● If you do not mind this overlap, press

PROG. to finish the timer program

setting. The program starting earlier or

program with the lower program number will be recorded.

Cancel or change program setting

To cancel a program, press CANCEL when

the Program screen you do not want is

shown.

To change a program, press the

appropriate button: START+/–, STOP+/–,

DATE+/–, CH+/–, DAILY (M-F) (Number

key “8”), WEEKLY (Number key “9”) and/or SP/EP when the

Program screen on which you want to make changes is shown,

then press OK or

● If the overlap is not yet solved, the conflicting programs will be

shown on the Program check screen. Repeat the above steps

again.

Timer warning display

A warning appears on the TV screen to tell

you that the timer-recording is to start in

5 minutes if you are not in the timer

recording standby mode at that time. Press

TIMER to put the VCR into timer recording

standby mode. To clear the display, press CANCEL on the Remote.

Checking tape position

When you change the VCR operation

mode from the stop mode to fast forward

or rewind mode, or when you perform an

Index Search (

墌

pg. 10) or Instant Review

(

墌

pg. 10), the tape position indicator

appears.

The position of “

” in relation to “B” (Beginning) or “E” (End)

shows you where you are on the tape.

● Set “SUPERIMPOSE” to “ON” (

墌

pg. 15).

Changing display information

Each time you press DISPLAY, the display panel

shows the channel number and the clock time

alternatively.

● You can change display in the stop or recording

mode, or during rewind/fast-forward.

● When “SUPERIMPOSE” is set to “ON”

(

墌

pg. 15) and DISPLAY on the Remote is pressed, time

counter and tape remaining time will appear on the TV screen.

To reset the time counter, press C.RESET on the Remote.

Function settings

You can use the other useful function settings on the Function Set

screen.

Access Main Menu screen, then

Function Set screen

Press MENU on the Remote. Press

move the highlight bar (arrow) to

“FUNCTION SET”, then press OK or

Select Function

Press

to move the highlight bar (arrow) to the function you

want to set.

Change setting

Press OK or

. The default setting is bold in the table below. Press

MENU to return to normal screen.

( , ) THEN ( ) (PROG.) : END

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

4 9:00P 10:00 10 12/24

PROGRAM NOT COMPLETED

PROGRAM OVERLAP

( , ) THEN ( ) (PROG.) : END

PR START STOP CH DATE

1 8:00P 10:00 12 12/24

2 10:00A 10:45 40 12/25

3 11:30P 1:00 125 12/25

4 9:00P 10:00 10 12/24

PROGRAM 4

START STOP

9:00PM 10:00PM

DATE CH

12/24/03 10 SP

WED

PRESS (CANCEL) TO CANCEL

PRESS (OK) TO CONFIRM

PRESS (PROG.) TO END

Other Functions

After a power failure occurs, Function Settings will be reset to

its default setting.

–WARNING–

TIMER RECORDING

TO START SOON

(CANCEL)

+++ E

REMAIN 1:00

COUNT – 1:23:45

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( , ), THEN (OK)

PRESS (MENU) TO END

FRONT AUX INPUT VIDEO

REAR AUX INPUT VIDEO

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

VIDEO STABILIZER OFF

BLUE BACK ON

2ND AUDIO RECORD OFF

AUDIO MONITOR HI-FI

S-VHS MODE ON

AV COMPU-LINK ON

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

SELECT WITH ( , ) AND (OK)

PRESS (MENU) TO END

FUNCTION

S-VHS ET

OFF

VIDEO CALIBRATION ON

PICTURE CONTROL AUTO

AUTO TIMER OFF

SUPERIMPOSE ON

AUTO SP

EP TIMER OFF

CONTINUED ON NEXT PAGE

HR-S5902U-EN.fm Page 14 Thursday, October 31, 2002 10:00 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S5902 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info