Bedienungsanleitung JVC HR-S5902 (Seite 16 von 24) (Englisch)

658620

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

— 16 —

Page 16 October 31, 2002 9:59 am

䡵 AUDIO MONITOR — HI-FI/HI-FI L/HI-FI R/NORM/MIX

This VCR can record two sound tracks simultaneously (normal and

Hi-Fi) on a Hi-Fi stereo tape. You can select the sound track(s) to

listen to while playing back a Hi-Fi stereo tape. In addition, when

playing back a prerecorded tape containing two separate audio

programs on the Hi-Fi tracks, you can choose either one by

selecting either “HI-FI L” or “HI-FI R”.

HI-FI: Normally select this. Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back.

NORM: Sound on the normal track is played back.

MIX: Both sounds on the Hi-Fi track and normal track are mixed

and played back.

NOTES:

● While playing back a monaural tape, sounds on the normal

track will be heard regardless of this setting.

● If RF connection (

墌

pg. 5) is used for viewing pictures on the

TV, sound will be monaural even though you select “HI-FI”.

● You can also use the A.MONITOR button on the Remote to

select the desired monitor sound. (

墌

pg. 9)

䡵 S-VHS MODE — ON/OFF

You can determine which recording mode — either S-VHS mode

or VHS mode — is used for recording on S-VHS tapes.

● When this function is set to “ON”, you can record on S-VHS

tapes with S-VHS picture quality.

● When this function is set to “OFF”, you can record on S-VHS

tapes with VHS picture quality.

NOTES:

● S-VHS mode allows you to make high quality video recordings

with horizontal resolution of 400 lines, comparing with the 230

lines of resolution of conventional VHS recordings. To achieve

the highest quality picture we recommended to record in S-VHS

mode. (But remember that a conventional VHS VCR without

SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)

● S-VHS MODE setting does not affect recording on VHS tapes.

Recording on VHS tapes is always performed in VHS mode

except when using S-VHS ET mode (

墌

pg. 15).

䡵 AV COMPU-LINK — ON/OFF

The remote PAUSE/AV COMPULINK terminal on the rear panel

can be used as either the remote PAUSE terminal or the AV

COMPULINK terminal.

● When this function is set to “ON”, you can use this terminal as

the AV COMPULINK terminal. By connecting other JVC’s AV

COMPULINK components, including amplifiers (or receivers)

and televisions, one touch control of the audio and video

components linked via their AV COMPULINK connectors

becomes possible.

● When this function is set to “OFF”, you can use this terminal as

the remote PAUSE terminal. If your JVC camcorder is equipped

with the Master Edit Control, you can control the VCR from the

camcorder. Connect the mini-plug cable (not supplied with this

VCR) between the remote PAUSE terminal and the EDIT

connector on the camcorder.

NOTE:

Refer to the other components’ instruction manuals for connection

and its operations.

䡵 FRONT AUX INPUT — VIDEO/S-VIDEO

You have to select which terminal — either VIDEO (composite) or

S-VIDEO (Y/C separate signals) to use as the video input terminal

on the front panel.

Make sure to select the correct terminal; otherwise, you may fail in

recording (editing) on this VCR.

䡵 REAR AUX INPUT — VIDEO/S-VIDEO

You have to select which terminal — either VIDEO (composite) or

S-VIDEO (Y/C separate signals) to use as the video input terminal

on the rear panel.

Make sure you select the correct terminal; otherwise, you may fail

in recording (editing) on this VCR.

Satellite Auto Recording

You can automatically record a satellite program which is timer-

programed on your DBS receiver.

Connect a DBS receiver to the AUDIO/VIDEO IN or S-VIDEO IN

connectors* on the rear panel. You can also connect the cable

box if it has a timer.

* To use these connectors, you have to select which one to use. (

墌

See

above, “REAR AUX INPUT”.)

Set timer program on DBS receiver referring to its instruction

manual.

Load a cassette with the record safety tab intact.

Press SP/EP to set the tape speed. The selected tape speed will

appear on the TV screen.

Press REC LINK for more than 2 seconds. The VCR turns off

automatically and enter the Satellite Auto Recording standby

mode (“L-1” and “#” light up). When signals come into the

VCR from the DBS receiver, the VCR starts recording (“#” and

“

䡬

” light up and “L-1” blinks). When no signals come into the

VCR, the VCR stops recording (“

䡬

” goes off).

NOTES:

● Be sure not to turn on the DBS receiver before the program starts

broadcasting; otherwise, the VCR will start recording when the

DBS receiver is turned on.

● To disengage the Satellite Auto Recording standby mode, press

REC LINK (“#” goes off).

● Depending on the type of satellite receiver, Satellite Auto

Recording may not be compatible.

Child Lock

You can disable the VCR operations. While the VCR is turned on,

press and hold POWER 1 on the Remote

for more than

10 seconds. The VCR turns off, “CL” appears for about 5 seconds

on the display panel.

To release the child lock, press and hold POWER 1 on the

Remote until the VCR turns on.

NOTES:

● Pressing TIMER during timer recording, unplugging the AC

power cord or a power outage also releases the child lock.

● Even if the child lock function is in use, it is possible to engage

and disengage the timer mode with TIMER (#) on the Remote.

Keep the Remote out of the children’s reach.

● Timer recording programs will be performed even if the child

lock function is activated.

Turn on the VCR and TV, and select the VCR channel (or AV

mode).

Turn on the VCR and TV, and select the VCR channel (or AV

mode).

CONTINUED ON NEXT PAGE

HR-S5902U-EN.fm Page 16 Thursday, October 31, 2002 10:00 AM

JVC HR-S5902 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info