Bedienungsanleitung JVC HR-S9911U (Seite 22 von 32) (Englisch)

658632

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

—22—

Multi-Brand Remote Control

When programed (set) with a manufacturer’s (brand’s) code, this

Remote can perform some of the remote control functions of the

listed TVs, cable boxes and DBS (Direct Broadcast Satellite)

receivers. You can control a JVC TV without setting a brand code.

NOTES:

● Some unit’s brands have more than one code listed. If after

setting, the remote does not operate the unit, try one of the other

listed codes.

● Depending on the type of unit, some or all functions cannot be

operated using this Remote.

● It is impossible to control a unit that does not have a remote

sensor.

● It is not possible to set the Remote for both your cable box and a

DBS receiver at the same time.

● Once you have set the Remote to operate a unit, you do not

have to set it again until you replace the Remote’s batteries.

● If the batteries of the Remote are discharged, the Remote will

not be able to control the TV, cable box or DBS receiver.

Replace the batteries.

TV Brand Setting

Turn on TV

Turn on the TV using the Power button on the TV or its Remote.

B Set TV brand code

A Press and hold POWER on the Remote.

B Press the Number keys to enter your TV’s brand code.

C Press STOP (8), and release POWER. The TV should turn off.

C Operate TV

First set the VCR/TV/CABLE/DBS selector to “TV”, then press one

of the following buttons: POWER, TV/VCR, TV CH+/–,

^ (TV

Muting), TV VOL+/–, and the Number keys.

● For some brands, you must press ENTER after having pressed the

Number keys to enter a channel number.

● To operate the VCR, set the VCR/TV/CABLE/DBS selector back

to “VCR”.

Cable Box or DBS Receiver Brand Setting

A Turn on cable box or DBS receiver

Turn on the cable box or DBS receiver using the Power button on

the unit or its Remote.

B Enter brand code

A Press and hold POWER on the Remote.

B Press the Number keys to enter your cable box’s (or DBS

receiver’s) brand code.

C Press STOP (8), and release POWER. The cable box (or DBS

receiver) should turn off.

C Operate cable box or DBS receiver

First set the VCR/TV/CABLE/DBS selector to “CABLE/DBS”, then

press one of the following buttons: POWER, TV CH+/–, and the

Number keys.

● For some brands, you must press ENTER after having pressed the

Number keys to enter a channel number.

● To change the cable box’s (or DBS receiver’s) channels, press TV

CH+/– or the Number keys. (The CH+/– button can be used to

change the VCR’s channels only.)

● To operate the VCR, set the VCR/TV/CABLE/DBS selector back

to “VCR”.

Changing Remote Control Code

This Remote is capable of transmitting two different control codes,

A code control signals or B code control signals. This Remote is

preset to send A code signals because your VCR is initially set to

respond to A code signals. You can easily change your Remote

and VCR to send and respond to B code signals. When using two

JVC VCRs, set the two VCRs and their Remotes to different codes,

so that the Remotes can operate the VCRs separately.

A Set remote control code for Remote

A Press and hold A/B.

B Press the Number key “2”.

C Press STOP (8), and release A/B.

● The Remote now can transmit B code control signals.

B Check remote control code for VCR

Press and hold 4 on the VCR for more than 5 seconds while the

VCR is turned off. The code currently set appears on the display

panel.

● Turn on the VCR and TV, and select the VCR channel (or AV

mode).

● Set the VCR/TV/CABLE/DBS selector on the Remote to “TV”.

TV BRAND CODE TV BRAND CODE

JVC

HITACHI

MAGNAVOX

MITSUBISHI

PANASONIC

RCA

SHARP

01, 03

04, 11

SONY

SAMSUNG

SANYO

SEARS

TOSHIBA

ZENITH

● Turn on the VCR and TV, and select the VCR channel (or AV

mode).

● Set the VCR/TV/CABLE/DBS selector on the Remote to

“CABLE/DBS”.

CABLE BOX BRAND CODE

ARCHER

CABLETENNA

CABLEVIEW

CITIZEN

CURTIS

DIAMOND

GC BRAND

GEMINI

GENERAL INSTRUMENTS

HAMLIN

JASCO

JERROLD

NOVAVISION

OAK

PANASONIC

PULSER

RCA

REGAL

REMBRANDT

SAMSUNG

SCIENTIFIC ATLANTA

SIGMA

SL MARX

SPRUCER

STARGATE

TELEVIEW

TOCOM

UNIKA

UNIVERSAL

VIDEOWAY

ZENITH

01, 05, 17

01, 17

15, 16, 17, 21, 25

01, 17

15, 16, 17, 21, 25

01, 04, 06, 11, 12, 15, 28

10, 18, 23

01, 04, 06, 11, 12, 15, 28

13, 14

15, 16, 17, 21, 25

13, 14

10, 18, 23

01, 16, 17

05, 16, 24

05, 16, 17, 24, 25

13, 14

05, 15, 16, 17, 21, 24, 25

05, 16, 24

01, 04, 16

01, 17

16, 17, 25

03, 09, 22

DBS RECEIVER BRAND CODE

JVC (DISH Network)

ECHOSTAR (DISH Network)

SONY (DSS)

RCA (DSS)

Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

HR-S9911U-EN.fm Page 22 Friday, April 26, 2002 11:37 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC HR-S9911U Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info