Bedienungsanleitung JVC KD-X172DB (Seite 26 von 172) (Englisch, Holländisch, Portugiesisch, Spanisch)

732186

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Default: [XX]

[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of the

microphone increases as the number increases.

[NR LEVEL]

[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise reduction level

until the least noise is being heard during a phone conversation.

[ECHO CANCEL]

[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo cancellation

delay time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call

Press to enter Bluetooth mode.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

To return to the previous setting item, press

Default: [XX]

[SETTINGS]

[AUTO ANSWER]

[01SEC] to [30SEC]: Answers an incoming call automatically in the

selected time (in seconds). ; [OFF]: Cancels.

[RING COLOR]

(For KD-X472DBT)

[COLOR01] to [COLOR49] ([COLOR08]): Selects the illumination

color for the buttons as notification when there is an incoming call and

during a call. ; [OFF]: Cancels.

[RING ILLUMI]

(For KD-X272DBT)

[BLINK01] to [BLINK05] ([BLINK02]): Selects the blinking pattern

for the buttons as notification when there is an incoming call. ;

[OFF]: Cancels.

Bluetooth®

(for KD-X472DBT/KD-X272DBT)

Make a call

You can make a call from the call history, phonebook, or dialing the number.

Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch

to the other phone.

“(Second device name)” appears.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

To return to the previous setting item, press

[RECENT CALL] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “<” indicates call received, “>“ indicates call made, “M” indicates call

missed.

• “NO HISTORY” appears if there is no recorded call history or call number.

Press the volume knob to call.

[PHONEBOOK] (Applicable only if the phone supports PBAP.)

Press 2

/ 1

to select the desired letter (A to Z, 0 to 9, and OTHERS).

• “OTHERS” appears if the first character is other than A to Z, 0 to 9.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• For using phonebook with this unit, make sure to allow access to or transfer

from your smartphone. Depending on the connected phone, the process

may be different.

• This unit can display only non-accent letters. (Accent letters such as “Ú” are

showns as “U”.)

JS_JVC_KD_X472DBT_E_EN_4a.indd 18JS_JVC_KD_X472DBT_E_EN_4a.indd 18 10/24/2019 11:34:22 AM10/24/2019 11:34:22 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KD-X172DB Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC KD-X172DB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info