Bedienungsanleitung JVC KW-V240BT (Seite 42 von 56) (Englisch)

682977

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

I/W

• Starts/pauses playback.

• Tuner: Changes the seek mode

(AUTO1, AUTO2, MANU).

Answers incoming calls.

0 – 9 Enters a number.

1 – 5 Enters a preset station number.

ANGLE Not used for this unit.

ASPECT Changes the aspect ratio.

• To check the current aspect ratio

setting, operate on the touch panel.

(Page12)

ENT Confirms selection.

DIRECT Enters direct search mode.

CLR Erases the misentry.

Searching for an item directly

While listening to the Tuner or during disc playback,

you can search for a station frequency/chapter/title/

folder/file/track directly using the number buttons.

• To search for a track from the VCD menu, perform

during PBC playback.

1 Press DIRECT to enter the search mode.

• Each time you press DIRECT, the item to search

for changes.

2 Press a number button to select a desired

item (station frequency/chapter/title/

folder/file/track).

• To erase a misentry, press CLR.

Remote ControllerRemote Controller

Press ENT to confirm.

To exit the search mode: Press DIRECT.

JVC Remote APP

JVC Remote is an application that connects and

controls compatible JVC car receivers via Bluetooth®

like a wireless remote control.

You can also operate this unit from a Smartphone

using JVC Remote APP.

This application can display the source information

of this unit on the smartphone’s screen, and enables

the user to make an audio setting using the graphic

user interface of this application.

This application also works as a free standalone

music player application, when your Smartphone is

not connected to this unit.

• For details, visit

<www.jvc.net/car/app/jvc_remote/>.

Installation and Connection Installation and Connection

WARNINGS

• DO NOT connect the ignition wire (red) and the

battery wire (yellow) to the car chassis (ground), you

may cause a short circuit, that in turn may start a fire.

• DO NOT cut out the fuse from the ignition wire (red)

and the battery wire (yellow). The power supply must

be connected to the wires via the fuse.

• Always connect the ignition wire (red) and the

battery wire (yellow) to the power source running

through the fuse box.

CAUTIONS

• Install this unit in the console of your car.

• Do not touch the metal parts of this unit during and

shortly after the use of the unit. Metal parts such as

the heat sink and enclosure become hot.

Before installation

Precautions on installation and connection

• Mounting and wiring this product requires skills and

experience. For best safety, leave the mounting and

wiring work to professionals.

• Mount the unit so that the mounting angle is 30° or

less.

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not install the unit in a location exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of water

splashing.

ENGLISH

00_KW-V2018ST_E_EN.indb 3800_KW-V2018ST_E_EN.indb 38 13/6/2017 10:56:26 AM13/6/2017 10:56:26 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC KW-V240BT Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC KW-V240BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info