Bedienungsanleitung JVC MX-J30 (Seite 20 von 28) (Englisch)

671416

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

– 17 –

CD Direct Recording

Everything on the CD goes onto the tape in the order it is on

the CD, or according to the order you have made for Program

play.

Put a recordable cassette into deck B.

Place a disc correctly on the circle of the disc

tray, with its label side up.

Press one of the disc number

buttons (CD 1 to CD 3) to select

the disc, then 7.

Press CD REC START.

“CD REC” appears, and the indicator

lights up on the display.

Deck B starts recording and the CD player

starts playing.

When the recording is done, “CD REC FINISHED”

appears on the display, and the CD player and deck B

stop.

To stop during CD Direct Recording, press 7.

To remove the cassette, press EJECT 0 for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator

lights up as —

• When using the Reverse Mode for CD Direct Recording,

start recording in the forward (3) direction first. When the

tape reaches its end while recording a song in the forward

direction (3), the last song will be recorded at the

beginning of the reverse side (2).

If you start recording on the reverse side (2), recording

will stop when recording is done only on one side (reverse)

of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up as —

To stop recording temporarily (except when the

playback source is deck A), press REC PAUSE on

the remote control.

To resume recording, press TAPE 2 3.

To remove the cassette, press EJECT 0 for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode

indicator lights up as —

• When using the Reverse Mode for recording,

start recording in the forward (3) direction first.

Otherwise, recording will stop when recording is done only

on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up as —

To record an AM station — Beat Cut

While recording an AM broadcast, beats may be heard

(which are never heard when listening to the broadcast

without recording it).

If this occurs, press PROGRAM repeatedly, while

recording, until the beats are reduced.

• Each time you press the button, the display

changes to show the following:

Dubbing Tapes

It is preferable that the tape type (type I or II) you record

from be the same as the tape type you record onto when

dubbing tapes.

Press TAPE 2 3, then 7.

Put the source cassette in deck A, and a

recordable cassette into deck B.

• Put the cassettes in both decks so that the tapes will run

in the forward (3) direction.

Press DUBBING.

Dubbing starts.

To stop during dubbing, press 7.

To remove the cassette, press 0 EJECT for deck A and

EJECT 0 for deck B.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator

lights up as —

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up as —

DUBBING

REC PAUSE

CUT1

CUT2 CUT3

REVERSE

MODE

PROGRAM

CD REC START

EN16-22.MX-J30[J]/5 99.1.27, 6:20 PM17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC MX-J30 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info