Bedienungsanleitung JVC MX-J30 (Seite 21 von 28) (Englisch)

671416

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

– 18 –

Using the Timers

PRESET

DAILY

S.MODE

DAILY

S.MODE

PRESET

SET

DAILY

Canceled

ON TIME

Clock

setting

(See page 9.)

REC

DAILY

S.MODE

TIMER

/CLOCK

TIMER

/CLOCK

– CD – – –

TUNER FM

TUNER AM

TAPE

AUX

There are three timers available — Recording Timer, Daily

Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the

unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or

radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the

preset level, and starts playing the specified source when the

on-time comes (the indicator flashes just before the on-

time, and continues flashing while the timer is operating).

Then, when the off-time comes (“OFF” flashes just before the

off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1

again.

• If you have made a mistake while setting timer, press

CANCEL. (However, this does not always work. If

CANCEL does not work, press TIMER/CLOCK repeatedly

and start from step 1 again.)

On the unit ONLY:

Press TIMER/CLOCK until

“DAILY” appears on the display.

The DAILY indicator also starts flashing on the display.

• Each time you press the button, the timer setting mode

changes as follows:

Press TIMER/CLOCK again.

“ON TIME” appears for 2 seconds, then the unit

enters on-time setting mode.

Set the on-time you want the unit

to turn on.

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then

press SET.

“OFF TIME” appears for 2 seconds, then

the unit enters off-time setting mode.

Set the off-time you want the unit

to turn off (on standby).

1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then

press SET.

The unit enters source selecting mode.

Press 4 or ¢ to select the

source to play, then press SET.

• Each time you press 4 or ¢, the

source changes as follows:

TUNER FM: tunes into a specified preset FM

station. = go to step 6.

TUNER AM: tunes into a specified preset AM station. =

go to step 6.

– CD – – –: plays a disc from a specified track of a

specified disc. = go to step 6.

• Make sure there is a CD on the selected disc

number tray.

TAPE: plays a tape in deck A or B. = go to step 7.

• Make sure that a tape is in the deck whose deck

indicator (A or B) is lit on the display.

• Make sure that the tape direction is correct.

AUX: plays an external source.= go to step 7.

• To use this setting, the external component has to

be equipped with the timer function.

SET

Continued

DAILY

S.MODE

EN16-22.MX-J30[J]/5 99.1.28, 5:31 PM18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC MX-J30 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info