57204
57
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
52
Convenient functions of TV viewing
You can operate your TV, set-top box (STB) and
video cassette recorder (VCR) using the remote
control of this system.
IMPORTANT
Slide the remote control mode
selector to the lowest position.
1 Press [TV].
2 Hold down [TV F].
• Hold down [TV F] until you finish step 5.
3 Press [ENTER] and release.
4 Press number buttons to enter the
manufacturer code.
Examples:
For a Hitachi TV: Press [0], then [7].
For a Toshiba TV: Press [2], then [9].
When the manufacturer of your TV has 2 or more
codes, select the manufacturer codes in turn and
find the one that operates the TV and the remote
control properly.
The initial code setting is “01 (JVC)”.
5 Release [TV F].
NOTE
It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
Manufacturer codes are subject to change with-
out notice. You may not be able to operate the
TV produced by the manufacturer.
After replacing the batteries of the remote con-
trol, set the manufacturer code again.
Before the TV operation, select the remote control
mode for the TV.
IMPORTANT
Slide the remote control mode
selector to the lowest position.
1 Press [TV].
2 Operate the remote control by
pointing it at the TV.
.
NOTE
When the remote control mode selector is slid to
the lowest position and [TV] is pressed, some
buttons may not work.
It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
Operating a TV using the
remote control
Manufacturer
Code
Manufacturer
Code
JVC 01
Nordmende
13, 14, 18,
26, 27, 28
Akai 02, 05 Okano 09
Blaupunkt 03 Orion 15
Daewoo 10, 31, 32 Panasonic 16, 17
Fenner 04, 31, 32 Philips 10
Fisher 05 Saba
13, 14, 18,
26, 27, 28
Grundig 06 Samsung
10, 19, 32,
35, 36, 37,
38
Hitachi 07, 08 Sanyo 05
Inno-Hit 09 SEG 15
Irradio 02, 05 Schneider 02, 05
Loewe 10 Sharp 20, 39, 40
Magnavox 10 Sony
21, 22, 23,
24, 25
Mitsubishi 11, 33
Telefunken
13, 14, 18,
26, 27, 28
Miver 03 Thomson
13, 14, 18,
26, 27, 28,
30
Nokia 12, 34 Toshiba 29
Setting the manufacturer code
Remote
control button
Usage
[TV F]
Turns on/off the TV.
[TV/VIDEO]
Changes between the TV and
video input.
[CH +/
] Changes channels.
[TV VOL +/
] Adjusts volume.
Number but-
tons (1-9, 0,
100+)
Selects the channels.
[TV RETURN]
Changes between the previously
selected channel and the current
channel.
Using the remote control for the TV
operation
NX-F3_NX-F7[B].book Page 52 Tuesday, January 15, 2008 4:39 PM
57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC NX-F7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC NX-F7

JVC NX-F7 Bedienungsanleitung - Deutsch - 139 seiten

JVC NX-F7 Bedienungsanleitung - Holländisch - 139 seiten

JVC NX-F7 Bedienungsanleitung - Französisch - 139 seiten

JVC NX-F7 Bedienungsanleitung - Italienisch - 139 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info