Bedienungsanleitung JVC TH-A10R (Seite 24 von 68) (Englisch)

57099

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

and represent disc types.

To play a disc

On the front panel

1. Switch the TV on and display video from this

system.

Set the TV input to video 1 (or video 2 or 3).

2. Insert the disc.

1 Press 0 *on the center unit to open the disc tray.

Change the playback source to DVD.

2 Place the disc in the tray.

3 Press 0 to close the disc tray.

Playback begins immediately a DVD auto-playback disc is

inserted.

3. Play the disc.

From the remote controls:

Press DVD.

Change the playback source to DVD. The remote control

enters the DVD mode and playback begins.

On the front panel:

Press 3**.

Change the playback source to DVD. Playback begins.

* When 0 on the center unit is pressed while on standby, power

is automatically turned on and the disc tray ejected.

** When 3 on the center unit is pressed while on standby, power

is automatically turned on, and playback begins, if a disc is in

the tray.

DVD is selected as the playback source if there is no disc in the

tray.

Notes:

• The unit can playback DVD VIDEO, Audio CD, and Video CD

discs only. Do not load other disc types.

For details about playable disc types, see page 5.

• When loading a disc in the tray, be sure to position the disc inside

the recess. Otherwise, the disc may be damaged when the tray is

closed, and the disc may not be removed form the unit.

• Playback begins automatically with some discs.

• DVD or video CDs recorded with PBC (playback control),

pressing PLAY may display the menu on the TV screen. You may

select items from the menu screen thus displayed and call up the

locations to be viewed (see pages 24 and 25 for details).

• You can also open and close the disc tray from the opening on-

screen display.

Use CURSOR 5/∞ to move pointer to ), then press ENTER to

open or close the disc tray.

• Discs may be played back from the on-screen menu.

Use the CURSOR 5/∞, move the pointer to #, and press ENTER

to begin playback.

To stop playback competely

From the remote controls:

Press STOP.

On the front panel:

Press 7.

Display when a disc is inserted —————————

When a DVD is inserted

Display window: Opening on-screen:

“READING”=“DVD”

When a video CD has been inserted

Display window: Opening on-screen:

“READING”=“VCD 12 48:12”

(total number of tracks and total time display)

«+After 4 seconds

“

VCD 1 4:12”

(first track time)

When an audio CD has been inserted

Display window: Opening on-screen:

“READING”=“CD 12 48:12”

(total number of tracks and total time display)

«+After 4 seconds

“

CD 1 4:12”

(first track time)

Using the DVD player

With the playback side (non-label side) down.

To insert an 8 cm disc, place it in the inner recess.

Primary remote control Secondary remote control

DVD DVD

TH-A10[J]3/1 00.2.24, 14:5022

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC TH-A10R Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC TH-A10R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info