Bedienungsanleitung JVC TH-A10R (Seite 22 von 68) (Englisch)

57099

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

The lamp display indicates the type of disc (DVD or CD) currently

playing as follows.

With Dolby digital 5.1 ch or DTS digital 5.1 ch surround

With Dolby digital (Lt/Rt *)

With stereo sound (eg Audio CD)

* Lt/Rt refers to the downmix output when connected to a device

that uses Dolby Pro Logic.

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep to music and know the

system will turn off by itself rather than play all night.

From the remote controls:

Press SLEEP repeatedly.

The shut-off time changes as follows (in minutes):

=10=20=30=60=90=120=150=OFF (Canceled)= (back to

the beginning)

When the shut-off time comes

The system turns off automatically.

To check or change the time remaining until

the shut-off time ———————————————

Press SLEEP once.

The remaining time until the shut-off time appears in minutes.

• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer ———————————

Press SLEEP repeatedly until “SLEEP OFF” appears on the display

window.

• Turning off the power also cancels the Sleep Timer.

Primary remote control Secondary remote control

SLEEP SLEEP

Using the DSP Modes

The built-in Surround Processor provides two types of the DSP

(Digital Signal Processor) mode — Surround mode and DAP

(Digital Acoustic Processor) mode.

Surround modes ———————————————

With this system, you can use two types of the Surround mode.

Dolby Surround (Dolby Digital and Dolby Pro Logic)*

Used to watch the soundtracks of software encoded with Dolby

Digital (bearing the mark ) or with Dolby Surround

(bearing the mark

Dolby Digital and Dolby Pro Logic can be selected automatically

according to software played back.

DTS Digital Surround**

DTS Digital Surround is a discrete 5.1 channel digital audio format

available on CD and DVD software.

To watch the soundtracks of video software bearing the mark ,

the system can provide you with DTS Digital Surround decoder.

DTS Digital Surround is automatically selected according to

software played back.

Note:

• Change the decode mode from “AUTO/PCM” to “DTS” before

playing an audio CD recorded with DTS Digital Surround..

* Manufactured under license from Dolby Laboratories. “Dolby”, “Pro

Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

Confidential Unpublished Works. c1992-1998 Dolby Laboratories, Inc.

** Manufactured under license from Digital Theater Systems, Inc. US Pat.

No. 5,451,942 and other world-wide patents issues and pending. “DTS”

and “DTS Digital Surround” are trademarks of Digital Theater Systems,

DAP modes —————————————————

The sound heard in a concert hall or club consists of direct sound

and indirect sound — early reflections and reflections from behind.

Direct sounds reach the listener directly without any reflection. On

the other hand, indirect sounds are delayed by the distances of the

ceiling and walls. These direct sounds and indirect sounds are the

most important elements of the acoustic surround effects. The DAP

mode can create these important elements, and gives you a real

“being there” feeling.

Basic operations

TH-A10[J]2/1 00.2.24, 14:4920

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC TH-A10R Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC TH-A10R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info