Bedienungsanleitung JVC UX-G60 (Seite 36 von 44) (Englisch)

56299

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Additional Information

Learning More about This System

Connections

(see pages 3 to 5)

• Make sure the antenna conductors do not touch any other

terminals, connecting cords or the power cord. Also, keep

the antennas away from metallic parts of the System,

connecting cords, and the AC power cord. This could cause

poor reception.

• Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the System.

• The speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, it

may cause color distortions. So, pay attention to the

following when installing the speakers.

– When placing the speakers near a TV set, turn off the

TV’s main power switch or unplug it before installing the

speakers.

Then wait at least 30 minutes before turning on the TV’s

main power switch again.

– Some TVs may still be affected even though you have

followed the above instructions. If this happens, move

the speakers away from the TV.

Daily Operations—Playback

(see pages 7 to 10)

Listening to the Radio:

• If you store a new station into an occupied preset number,

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure

occurs, the preset stations will be erased in a few days. If

this happens, preset the stations again.

Listening to the TV Sound:

• When you use this function, connect the System and TV

with the Scart cable.

Playing Back a Disc/File:

• When you change the source to DVD/CD or USB

MEMORY, it may take a while to activate the source.

• The following functions cannot be used for the files in the

USB mass storage class device:

– Selecting the View Angle (page 18)

– Special Effect Playback (page 19)

– Program Play (page 20)

– A-B Repeat (page 22)

– Time Search (page 25)

• On some DVD, SVCD, or VCD discs, the actual operations

may be different from what is explained in this manual, due

to the programming and disc structure; such differences are

not a malfunction of this System.

• Some DVD Audio discs prohibit downmix. When you play

back such a disc, “LR ONLY” appears on the display and

the System plays back the left front and right front signals.

• When playing back a DVD Audio disc recorded in MLP

(Meridian Lossless Packing; a lossless audio compression

system that can completely recreate the PCM signal), the

signals are recognized as the linear PCM signals, however,

no indicator lights up on the display.

• This System can recognize up to 4 000 tracks in a disc.

Also, the System can recognize up to 150 tracks per group

and up to 99 groups in a disc.

– If there are any unplayable files in a folder, those files are

also counted in the total file number.

– Playable files which do not belong to any groups are

handled as GROUP 1.

• For playback of files in the USB mass storage class

device...

– While the System is reading a disc, changing the source

to USB MEMORY may cause the System to continue

playback the DVD/CD source. In this case, press 7

the main unit to reactivate the USB source.

– When connecting a USB mass storage class device, refer

also to its manual.

– Connect one USB mass storage class device to the

System at a time. Do not use a USB hub.

– You cannot charge any USB device through the USB

MEMORY jack of this System.

– While playing back a file in a USB mass storage class

device, do not disconnect the device. It may cause

malfunction on both the System and the device.

– JVC bears no responsibility for any loss of data in the

USB mass storage class device while using this System.

– When connecting with a USB cable, use the cable whose

length is less than 1 m.

– This System is compatible with the USB Full-Speed (not

compatible with the USB 1.1).

– You can playback the following types of files in a USB

mass storage class device (maximum data transfer rate:

2 Mbps):

– Music: MP3, WMA

– Picture: JPEG

– Movie: MPEG-1, MPEG-2, ASF, DivX (maximum

frame rate of 30 fps for progressive)

– You cannot playback a file larger than 2 Gigabyte.

– When playing a file which has a large transfer rate,

frames or sounds may be dropped during playback.

– This System cannot recognize a USB mass storage class

device whose rating is other than 5 V and does not exceed

500 mA.

– This System may not playback some USB mass storage

class devices and does not support DRM (Digital Rights

Management).

– This System may not playback some files even though

their formats are listed above.

• For DVD-VR playback...

– This System can play only a disc of UDF-Bridge format.

– For details about DVD-VR format and play list, refer to

the manual of the recording equipment.

– You cannot use reverse slow motion, Program Play, or

Random Play.

• For MP3/WMA playback...

– MP3/WMA discs require a longer readout time than

regular CDs. (It depends on the complexity of the group/

file configuration.)

– Some MP3/WMA files cannot be played back and will

be skipped. This results from their recording processes

and conditions.

– This System can play only a disc of ISO 9660 Level 1 or

Level 2.

– This System can play back MP3/WMA files with the

extension code <.mp3> or <.wma> (regardless of the

letter case—upper/lower).

– It is recommended that you make each MP3/WMA file at

a sampling rate of 44.1 kHz and at a bit rate of 128 kbps.

This System cannot play back files made at a bit rate of

less than 64 kbps.

UX-G60[B].book Page 33 Thursday, February 9, 2006 1:15 PM

JVC UX-G60 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC UX-G60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info