Bedienungsanleitung JVC UX-G60 (Seite 37 von 44) (Englisch)

56299

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

• For JPEG files playback...

– It is recommended that you record a file at 640 x 480

resolution. (If a file has been recorded at a resolution of

more than 640 x 480, it will take a long time to be shown.)

– This System can play only baseline JPEG files*.

Progressive JPEG files* or lossless JPEG files* cannot

be played.

* Baseline JPEG format: Used for digital cameras,

web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used

now.

– This System can playback JPEG files with the extension

code <.jpg> or <.jpeg> (regardless of the letter case—

upper/lower).

– This System may not playback JPEG files properly if

they are recorded from a device other than a digital

camera.

– During slide-show playback, zoom cannot be operated.

• For MPEG-1/MPEG-2 playback...

– The stream format should conform to MPEG system/

program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is

recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480

x 480/ 352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio layer-2

or MPEG2 Audio Layer-2.

• For ASF playback...

– This System can play back ASF files with the extension

code <.asf> (regardless of the letter case—upper/lower).

– This System supports ASF files whose resolution is

352 x 288 pixels or less.

– Some recorded files may not be able to playback

depending on file characteristics, kind of digital camera/

video camera, or recording conditions.

– You cannot use the following functions—One Touch

Replay, Slow motion, A-B Repeat, Program Play and

Random Play.

• For DivX playback...

– This System can play only a disc of UDF-Bridge format.

“Multi-border” is not supported.

– The System supports all versions of DivX

video

(including DivX

6).

– The System supports DivX files whose resolution is 720

x 480 pixels or less (30 fps), and 720 x 576 pixels or less

(25 fps).

– Audio stream should conform to MPEG1 Audio Layer-2

or MPEG Audio Layer-3 (MP3).

– This System can play back DivX files with the extension

code <.divx> <.div> <.avi> (regardless of the letter

case—upper/lower).

– The System does not support GMC (Global Motion

Compression).

– The file encoded in the interlaced scanning mode may

not be played back correctly.

– You cannot use the following functions—One Touch

Replay, Slow motion, A-B Repeat, Program Play,

Random Play and on-screen operations.

Playing Back a portable audio device:

• When QP Link fails due to a weak sound signal from the

AUX jack, Auto Standby may turn the System off even if

you can hear the sound from the speakers.

In such cases, adjust the volume level of the component

louder so that the System can detect the sound signal

properly.

• Changing from AUX to another source while QP Link

works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing QP LINK on the remote control twice.

– Unplug the component from the AUX jack, then plug it

in again.

• If you press

(Standby/on) to turn the System off or if

preset Timer turns the System off while QP Link works, the

System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

– When the sound signal from the AUX jack stops or is too

weak for about 30 seconds after the System is turned off.

– When you turn on the power again.

• QP Link may start working when you just plug in the

component to the AUX jack or unplug it. This is not a

malfunction.

Daily Operations—Sound & Other Adjustments

(see pages 11 to 14)

Adjusting the Sound:

• This function also affects the sound through the

headphones.

Changing the Scanning Mode:

• You cannot change the scanning mode to progressive in the

following cases:

– When your TV does not support the progressive video

input.

– When you have not connected your TV to the system

using a component video cord.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Advanced Radio Operations

(see pages 15

and 16)

• If you want to know more about Radio Data System, visit

«http://www.rds.org.uk».

• If the System takes time to show the Radio Data System

information—PS, PTY, RT signals, “WAIT PS,” “WAIT

PTY,” or “WAIT RT” will appear while searching.

Unique DVD/VCD Operations

(see pages 17 to 19)

Selecting the Audio Track:

• On some DVD Video discs, you cannot change audio

languages while playing back.

Special Effect Playback:

• During slow-motion playback, no sound will be

reproduced.

• While zoomed in, the picture may look coarse.

UX-G60[B].book Page 34 Friday, February 10, 2006 10:33 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UX-G60 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC UX-G60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info