652947
18
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
18 | EN
Power Supply
The unit requires DC 9V 2.0A .
Plug the supplied adaptor cable into the connector on the back of the unit and the other end into
a suitable wall socket.
Make sure that the output power of the wall outlet matches the required power of the adaptor.
Adaptor must be plugged in to operate. The unit does not operate on batteries.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode and the time will be shown in the display.
3. To switch the unit on, press the STANDBY button.
4. To switch the unit off into standby mode, press the STANDBY button once again.
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the CLK SET button. The time format will be shown.
2. Select between 12h display and 24h display by pressing the / buttons.
3. Press the CLK SET button again. The hours will start ashing.
4. Set the current hours by pressing the / buttons.
5. Press the CLK SET button again. The minutes will start ashing.
6. Set the current minutes by pressing the / buttons.
7. Press the CLK SET button again to conrm all settings. The time is now set.
Alarm Setting
An alarm can only be set while the unit is in standby mode.
This unit enables you to set 2 separate alarms. You can select to wake to CD, radio or buzzer.
1. While the unit is in standby mode, press and hold for 2 seconds the ALARM 1 or ALARM 2 but-
ton. The symbol
(or ) and the hour of alarm 1 (or alarm 2) will ash.
2. Set the desired hour by pressing the / buttons.
3. Press the ALARM 1 (or ALARM 2) button again. The minutes will start ashing.
4. Set the desired minutes by pressing the / buttons.
5. Press the ALARM 1 (or ALARM 2) button again to select the wake up mode.
6. Select between CD, radio, or buzzer by pressing the / buttons.
Activating/Deactivating an Alarm
To activate a previously set alarm, press the respective ALARM button (1 or 2) while the unit is
in standby mode. The alarm symbol
(or ) appears in the display. This alarm will now ring at
the previously set time.
To deactivate a set alarm, press the respective ALARM button (1 or 2) while the unit is in standby
mode. The alarm symbol
(or ) will disappear from the display. This alarm is now deacti-
vated and will not ring.
Checking a Set Alarm
Press the INFO button to check at what times and modes the alarms are set.
Stopping an Active Alarm
When the alarm is sounding, press the ALARM 1 or ALARM 2 button to turn it off. The alarm
icon will disappear from the display. You must activate the alarm again in order for it to function
again the next day.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Karcher Audio MC 6540BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info